Tell us the joint width, expected movement, load and finish, and our team will recommend a suitable VEDA system. Product information is provided by the manufacturer and may change; please confirm specifications with us before ordering.
Aluminium expansion joint covers are aesthetic, decorative and economical.
Quick and easy to install, with no need for drilling or gluing, they come in a range of clip models (S, SLL, XL or XXL) suitable for all joint openings from 20 to 110 mm.
Aesthetic, decorative and economical
Quick and easy to install, no drilling or sealing needed
For joint gaps from 20 to 110 mm
Sizes and movement
CJ Alu sizes: joint gap, movement and dimensions
Model
Joint gap W
Visible width S
CJV-050
20 – 35 mm
50 mm
CJV-060
20 – 40 mm
60 mm
CJV-070
35 – 50 mm
70 mm
CJV-090
40 – 70 mm
90 mm
CJV-120
60 – 90 mm
120 mm
CJV-140
90 – 110 mm
140 mm
CJV-050 A
20 – 35 mm
50 mm
CJV-060 A
20 – 40 mm
60 mm
CJV-070 A
35 – 50 mm
70 mm
CJV-090 A
40 – 70 mm
90 mm
CJV-120 A
60 – 90 mm
120 mm
Specifications
Product type
Clip-on aluminium expansion joint cover
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural, RAL colours
Version
Flat and angle
Joint gap
Up to 110 mm
Sizes available
11 models
Compatibility
VEDA fire protection solutions
Details
Aesthetic finishing with aluminium expansion joint cover
In the building industry, every stage in the installation of expansion joints is crucial, including the finishing touches. Our clip-on aluminium joint covers are designed to protect and cover joints in facades, walls, ceilings and floors with light foot traffic. We offer two complementary models: aluminium corner joint cover and aluminium flat joint cover. They enable you to cover your joints while ensuring a real coherence between each surface of the building. Building expansion joint covers can be used for both new-build and renovation projects.
Extruded joint covers
Joint covers are made from 6063 T6 alloy, and may or may not be coated with a 15-micron thick colorless natural anodizing layer. Aluminium flat joint covers are sold in bundles of 10 x 3-ml lengths (30 ml). Corner joint covers are also sold in the same packaging.
Aluminium expansion joint covers can be factory-lacquered in any RAL color. Please consult us to check the possibilities. All models can be supplied in raw or anodized aluminum. They can also be drilled for mechanical fastening in special cases.
Easy-to-install joint covers
There is no need to drill, adhesive or screw: clip-on aluminium joint covers are easy to clip on. Specially designed clips make them easy to install. Made from stainless steel, the clips guarantee a particularly stable hold, and provide permanent flexibility (spring effect) without loss of tension. These unique and particularly innovative clips are protected by international patent laws. The choice of clip is dictated by the width of the expansion joint. Special clips can be designed and manufactured on request: joints with chamfers or any other specific case. Please consult our technical department.
The VEDA CJ Alu is a clip-on aluminium expansion joint cover. Quick and easy to install, with no need for drilling or gluing, they come in a range of clip models (S, SLL, XL or XXL) suitable for all joint openings from 20 to 110 mm.
What joint gap widths does the CJ Alu cover?
It covers joint gaps up to 110 mm across 11 models, from CJV-050 to CJV-120 A. The size table lists the gap for each model.
What is the CJ Alu made of?
It is made of aluminium. Colour and finish options: natural and RAL colours. Version: flat and angle.
Is the CJ Alu compatible with fire protection?
Yes. It is compatible with VEDA fire protection solutions.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the CJ Alu for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Our clip-affixed brass joint covers provide an aesthetical and decorative solution. Our joint covers are available in different clip sizes for particular joint gaps, from 10 mm to 60 mm.
The Clip affixed brass joint covers are used in new constructions and in refurbishment projects, indoors or outdoors, in joints from 10-mm to 60-mm wide in walls, ceilings and floors (pedestrian use).
They are installed easily by means of clips (clip sizes S, L, XL and XXL)
Made with extruded brass, we can also supply special sections on request
Brass joint covers are supplied in rough pressed finish
Aesthetic, decorative and economical
Quick and easy to install, no drilling or sealing needed
For joint gaps from 10 to 60 mm
Sizes and movement
CJ Brass sizes: joint gap, movement and dimensions
Model
Joint gap W
Visible width S
Total width B
Height H
CJ-090
20 – 60 mm
90 mm
90 mm
3 mm
Specifications
Product type
Clip-on brass expansion joint cover
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
Brass
Colour / finish
Mill finish
Version
Flat only
Joint gap
Up to 60 mm
Sizes available
1 model
Compatibility
VEDA fire protection solutions
Frequently asked questions
What is the CJ Brass?
The VEDA CJ Brass is a clip-on brass expansion joint cover. Our clip-affixed brass joint covers provide an aesthetical and decorative solution. Our joint covers are available in different clip sizes for particular joint gaps, from 10 mm to 60 mm.
What joint gap widths does the CJ Brass cover?
It covers joint gaps up to 60 mm.
What is the CJ Brass made of?
It is made of brass. Colour and finish options: mill finish. Version: flat only.
Is the CJ Brass compatible with fire protection?
Yes. It is compatible with VEDA fire protection solutions.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the CJ Brass for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Our clip-on building expansion gaps covers in PVC can be used either indoors or outdoors wall expansion joints, ceilings and floors (light use). The expansion joint covers made for the floor are intended for a light use.
They come in a variety of clip sizes to suit 10mm to 120mm joint gaps.
Aesthetic, decorative and economical
Quick and easy to install, no drilling or sealing needed
For joint gaps from 10 to 120 mm
Sizes and movement
CJ PVC sizes: joint gap, movement and dimensions
Model
Joint gap W
Visible width S
CJV-050
20 – 35 mm
50 mm
CJV-070
35 – 50 mm
70 mm
CJV-090
40 – 70 mm
90 mm
CJV-150
60 – 120 mm
150 mm
CJV-050 A
20 – 35 mm
50 mm
CJV-070 A
35 – 50 mm
70 mm
CJV-090 A
40 – 70 mm
90 mm
Specifications
Product type
Clip-on PVC expansion joint cover for walls, ceilings and floors
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
PVC
Colour / finish
White, beige, grey
Version
Flat and angle
Joint gap
Up to 120 mm
Sizes available
7 models
Details
Ceiling and floor expansion joint covers characteristics?
Clip-on PVC building expansion gap covers are used in new constructions and in refurbishment projects, for 10mm to 120mm interior wall expansion joints, as well as ceilings and low-traffic floors. Expansion gap covers are installed easily by means of clips (sizes S, L, XL and XXL) and are fully compatible with our Vedafeu fire stop products.
Standard PVC building wall, ceiling and floor expansion joint covers are available in white (RAL 9016), beige (RAL 1015) and grey (RAL 7035). For other colours, please contact us.
Frequently asked questions
What is the CJ PVC?
The VEDA CJ PVC is a clip-on PVC expansion joint cover for walls, ceilings and floors. Our clip-on building expansion gaps covers in PVC can be used either indoors or outdoors wall expansion joints, ceilings and floors (light use). The expansion joint covers made for the floor are intended for a light use.
What joint gap widths does the CJ PVC cover?
It covers joint gaps up to 120 mm across 7 models, from CJV-050 to CJV-090 A. The size table lists the gap for each model.
What is the CJ PVC made of?
It is made of PVC. Colour and finish options: white, beige and grey. Version: flat and angle.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the CJ PVC for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
CJ-HD
Floor expansion joint cover for car parks
Joint covers & compression profiles · Car park joints
The VEDA CJ-HD is a floor expansion joint cover for car parks. It covers joint gaps up to 600 mm, accommodates movement of up to +200 / −600 mm and is made of rubber and steel.
Floor expansion joint for carparks and any other place with or without traffic of slow vehicles. Different widths available, for gaps from 100 to 600mm.
Extra-thick steel plate reinforcement to withstand intensive vehicular traffic and rubber finish for shock-noise reduction due to vehicle traffic.
Floor expansion joint for carparks
For openings from 100 to 600 mm
Reinforced with a thick steel plate and rubber finish
Sizes and movement
CJ-HD sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
CJ-HD-100
100 mm
+50 / −100 mm
300 mm
300 mm
12 mm
CJ-HD-200
200 mm
+100 / −200 mm
450 mm
450 mm
17 mm
CJ-HD-400
400 mm
+200 / −400 mm
750 mm
750 mm
19 mm
CJ-HD-600
600 mm
+200 / −600 mm
900 mm
900 mm
21 mm
Specifications
Product type
Floor expansion joint cover for car parks
Category
Joint covers & compression profiles · Car park joints
Brand
VEDA (VEDA France)
Material
Rubber, steel
Colour / finish
Black
Version
Flat
Joint gap
Up to 600 mm
Movement
Up to +200 / −600 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the CJ-HD?
The VEDA CJ-HD is a floor expansion joint cover for car parks. Floor expansion joint for carparks and any other place with or without traffic of slow vehicles. Different widths available, for gaps from 100 to 600mm.
What joint gap widths does the CJ-HD cover?
It covers joint gaps up to 600 mm in 4 sizes: CJ-HD-100 for gaps up to 100 mm, CJ-HD-200 for gaps up to 200 mm, CJ-HD-400 for gaps up to 400 mm and CJ-HD-600 for gaps up to 600 mm.
How much movement can the CJ-HD accommodate?
Up to +200 / −600 mm, depending on the model. The size table lists the movement for each model.
What is the CJ-HD made of?
It is made of rubber and steel. Colour and finish options: black. Version: flat.
Is the CJ-HD compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the CJ-HD defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the CJ-HD for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
CJE-PF counterstunk joint cover is designed to protect and cover floor joints, but can also be used for facades, walls and ceilings. Aesthetic, decorative and economical, it can be used indoors or outdoors. Pre-drilled and countersunk, it is easy to install, and are used in new buildings and renovation projects for joints with openings from 10 to 250 mm.
For joint gaps up to 250 mm
Economical drilled joint cover, quick and easy installation
For new or refurbishment projects
Sizes and movement
CJE-PF sizes: joint gap, movement and dimensions
Model
Joint gap W
Visible width S
Total width B
CJE-PF 090
10 – 20 mm
90 mm
90 mm
CJE-PF 120
10 – 40 mm
120 mm
120 mm
CJE-PF 140
10 – 50 mm
140 mm
140 mm
CJE-PF 160
10 – 60 mm
160 mm
160 mm
CJE-PF 200
10 – 100 / 10 – 75 mm
200 mm
200 mm
CJE-PF 250
10 – 130 / 10 – 80 mm
250 mm
250 mm
CJE-PF 320
10 – 190 / 10 – 90 mm
320 mm
320 mm
CJE-PF 400
10 – 250 / 10 – 100 mm
400 mm
400 mm
CJE-PF 040 A
10 – 20 mm
40 mm
40 mm
CJE-PF 140 A
10 – 100 mm
140 mm
140 mm
CJE-PF 180 A
10 – 140 mm
180 mm
180 mm
Specifications
Product type
Drilled and countersunk aluminium joint cover
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
RAL colours
Version
Flat and angle
Joint gap
Up to 250 mm
Sizes available
11 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load-bearing capacity is based on the initial position of the joint. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200mm.
Details
How to cover an expansion joint?
Aluminium expansion joint cover is used to cover and protect expansion joints in building structures. It is recommended to close expansion joints with a drilled joint cover (or undrilled) to make them more aesthetically pleasing, prevent the accumulation of dirt and provide safe passage for pedestrians and vehicles. The joint cover also facilitates maintenance of the expansion joint.
How to fix an expansion joint?
Expansion joint covers can be glued or clipped on, like our CJVs, or mechanically fastened with screws, like this drilled joint cover. The type of fastening will vary according to the application (floor, wall, facade, ceiling), the building’s frequency of use, and the content of the expansion joint (fire barrier system, VED’EPDM membrane).
CJE-PF counterstunk joint cover is supplied in mill finish aluminum, but can be anodized or factory-lacquered in any RAL color upon request. Please consult us.
Our floor expansion joint cover is made from 6063 T6 alloy. Available in floor/floor and floor/wall versions.
What is the role of a floor expansion joint cover?
The expansion joint is an empty space, free of all materials. Present throughout the height of the building, it allows each element to move freely to avoid any collisions. The origins of movements are varied: concrete shrinkage, structural settlement, movements generated by the environment (trains, winds, etc.), earthquakes, etc. Movements can be horizontal, vertical, shear or multidirectional. This configuration is present throughout the building: parking lots, roofs, terraces, walkways, etc. The design office calculates the location of expansion joints and the initial opening.
How to choose an expansion joint?
To find the right drilled joint cover for your building’s configuration, here’s what you need to know:
The initial opening of the expansion joint in mm
Expected movement in mm or %
Location of expansion joint: floor, wall, facade, ceiling
Depending on the characteristics selected, our software will indicate the expansion joints best suited to your configuration (floor expansion joint cover, vertical expansion joint cover, drilled joint cover, counterstunk joint cover, fire barrier system).
Frequently asked questions
What is the CJE-PF?
The VEDA CJE-PF is a drilled and countersunk aluminium joint cover. CJE-PF counterstunk joint cover is designed to protect and cover floor joints, but can also be used for facades, walls and ceilings. Aesthetic, decorative and economical, it can be used indoors or outdoors.
What joint gap widths does the CJE-PF cover?
It covers joint gaps up to 250 mm across 11 models, from CJE-PF 090 to CJE-PF 180 A. The size table lists the gap for each model.
What is the CJE-PF made of?
It is made of aluminium. Colour and finish options: RAL colours. Version: flat and angle.
Is the CJE-PF compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the CJE-PF defined?
The load-bearing capacity is based on the initial position of the joint. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the CJE-PF for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections.
Generally installed by mechanical means, they are drilled and countersunk in one side every 400 mm, i.e. 7 holes per 3-m bar.
They are used in floors, walls and ceilings, indoors or outdoors, in all types of constructions, such as shopping centres, airports, stations, office buildings, hospital, residential buildings, department stores, schools, supermarkets and hypermarkets, public council buildings, leisure centres, factories…
They are fully compatible with our Vedafeu C fire barrier cords and beads
The CJP range is available in flat sections and angle sections (A), in different thicknesses. Standard thicknesses range from 1.5 mm to 3 mm.
It is possible to supply on request folded sections of much greater thicknesses up to 20 mm
They are available in plain aluminium, anodised aluminium, powder-coated aluminium in any RAL colour, galvanised steel, 304 / 316 stainless steel and brass.
It is possible to drill both sides, with round holes in one side and elongated holes in the other side in order to guide and keep as it moves with the expansion and contraction, or with elongated holes in both sides.
For new or refurbishment projects
For joint gaps up to 500 mm
Custom-made possibilities, contact us
Sizes and movement
CJP sizes: joint gap, movement and dimensions
Model
Joint gap W
Visible width S
Total width B
Height H
CJP-125 A
0 – 75 mm
125 mm
125 mm
1 – 3 mm
CJP-175 A
75 – 100 mm
175 mm
175 mm
1 – 3 mm
CJP-200
0 – 75 mm
200 mm
200 mm
1 – 3 mm
CJP-225 A
100 – 150 mm
225 mm
225 mm
1 – 3 mm
CJP-250
75 – 100 mm
250 mm
250 mm
1 – 3 mm
CJP-275 A
150 – 200 mm
275 mm
275 mm
1 – 3 mm
CJP-300
100 – 150 mm
300 mm
300 mm
1 – 3 mm
CJP-325 A
200 – 250 mm
325 mm
325 mm
1 – 3 mm
CJP-350
150 – 200 mm
350 mm
350 mm
1 – 3 mm
CJP-375 A
250 – 300 mm
375 mm
375 mm
1 – 3 mm
CJP-400
200 – 250 mm
400 mm
400 mm
1 – 3 mm
CJP-425 A
300 – 350 mm
425 mm
425 mm
1 – 3 mm
CJP-450
250 – 300 mm
450 mm
450 mm
1 – 3 mm
CJP-475 A
350 – 400 mm
475 mm
475 mm
1 – 3 mm
CJP-500
300 – 350 mm
500 mm
500 mm
1 – 3 mm
CJP-525 A
400 – 450 mm
525 mm
525 mm
1 – 3 mm
CJP-550
350 – 400 mm
550 mm
550 mm
1 – 3 mm
CJP-575 A
450 – 500 mm
575 mm
575 mm
1 – 3 mm
CJP-600
400 – 450 mm
600 mm
600 mm
1 – 3 mm
CJP-650
450 – 500 mm
650 mm
650 mm
1 – 3 mm
Specifications
Product type
Folded joint cover
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
Aluminium, galvanized steel, stainless steel
Colour / finish
RAL colours
Version
Flat and angle
Joint gap
Up to 500 mm
Sizes available
20 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Frequently asked questions
What is the CJP?
The VEDA CJP is a folded joint cover. The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections.
What joint gap widths does the CJP cover?
It covers joint gaps up to 500 mm across 20 models, from CJP-125 A to CJP-650. The size table lists the gap for each model.
What is the CJP made of?
It is made of aluminium, galvanized steel and stainless steel. Colour and finish options: RAL colours. Version: flat and angle.
Is the CJP compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the CJP for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
This drilled and bent vertical expansion joint cover is the most economical solution for covering expansion joints.
For openings up to 120 mm
Aesthetic and economical joint cover
In mill finish aluminum
Sizes and movement
CJV sizes: joint gap, movement and dimensions
Model
Joint gap W
Visible width S
CJV 100
30 mm
100 mm
CJV 160
80 mm
160 mm
CJV 200
120 mm
200 mm
Specifications
Product type
Vertical expansion joint cover for mechanical fastening
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat
Orientation
Vertical
Joint gap
Up to 120 mm
Sizes available
3 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Details
What is an expansion joint cover?
Covering an expansion joint with a joint cover helps to:
protect it from small debris (small pebbles, cigarette butts, etc.), so as not to interfere with its proper functioning
hide this empty space to make the surface more aesthetically pleasing
make the building fireproof or watertight.
The joint cover is installed over the entire height of the building, whether on the floor, wall, facade, ceiling or roof. It allows the structure to move freely and prevents possible deformation.
Our CJV raw aluminum expansion joint cover is fastened to walls, facades and ceilings with 4.5×50 stainless steel screws and nylon dowels. Other finishes are available on request. For special configurations, we can suggest to glue the construcion expansion joint cover with our MS adhesive. This aluminium expansion joint cover is suitable for openings up to 120 mm.
CJV vertical expansion joint covers are the perfect solution for building renovation and construction.
This highly economical solution can be used indoors and outdoors, in the construction of buildings and renovation projects and in all types of building: shopping centers, offices, hospitals, etc. This vertical expansion joint cover is suitable for a variety of applications. You can therefore use this productct as :
facade expansion joint cover
wall expansion joint cover
ceiling expansion joint cover.
CJV vertical expansion joint cover installation
Installing the joint cover on an indoor or outdoor wall is quick and easy:
Verify the initial gap and identify the suitable reference.
If necessary, remove any material left in the joint (polystyrene, honeycomb cardboard, etc.). Surfaces must be clean and dry.
Make sure that the edges of the joint are level
Draw a line parallel to the joint at 40mm from the edge of the joint.
Mark the location of the holes with a pencil. If necessary, cut the lengths using a grinder equipped with a metal disc.
Drill holes
Vacuum supports and holes.
Position the joint cover and fit the 6 nylon dowels and 4.5×50 stainless steel screws.
A more complete installation sheet is available on request.
Our complementary products to our vartical expansion joint cover:
The system can be completed with a firestop solution and/or a waterproofing membrane to ensure fire and/or water tightness:
VEDAFEU C firestop rope or VEDAFEU N20 blanket
VED’EPDM waterproofing membrane.
The CJV construction expansion joint cover is suitable for wall, facade and ceiling applications. For floor applications, we can supply our CJE-PF raw aluminum (or anodized) joint cover. This floor expansion joint cover is suitable for light and low-speed vehicle traffic.
We look forward to working with you on your construction and renovation projects.
Frequently asked questions
What is the CJV?
The VEDA CJV is a vertical expansion joint cover for mechanical fastening. This drilled and bent vertical expansion joint cover is the most economical solution for covering expansion joints.
What joint gap widths does the CJV cover?
It covers joint gaps up to 120 mm in 3 sizes: CJV 100 for gaps up to 30 mm, CJV 160 for gaps up to 80 mm and CJV 200 for gaps up to 120 mm.
What is the CJV made of?
It is made of aluminium. Colour and finish options: natural. Version: flat.
Is the CJV compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the CJV for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
CP
Compression profile for floor expansion joints
Joint covers & compression profiles
The VEDA CP is a compression profile for floor expansion joints. It covers joint gaps up to 100 mm, accommodates movement of ±12.5 to ±50 mm and is made of EPDM and PVC.
Flexible expansion joints in thermoplastic vulcanizate or EPDM to be installed on floor, sealed with a special glue.
Internal cell’s design allows up to 50% multidirectional movements while maintaining sufficient lift to absorb the traffic.
Hydrocarbon and UV resistant profiles, to be installed at least 5mm below the floor level
Economical product, quick installation
Hydrocarbon and UV resistant profiles
For joint gaps from 25 to 100 mm
Sizes and movement
CP sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Height H
CP-025
25 mm
+12.5 / −12.5 mm
25 mm
57 mm
CP-050
50 mm
+25 / −25 mm
50 mm
64 mm
CP-075
75 mm
+37.5 / −37.5 mm
75 mm
64 mm
CP-100
100 mm
+50 / −50 mm
100 mm
89 mm
Specifications
Product type
Compression profile for floor expansion joints
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
EPDM, PVC
Colour / finish
Black
Version
Flat only
Joint gap
Up to 100 mm
Movement
±12.5 to ±50 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions
Load-bearing capacity. The load-bearing capacity is based on the initial position of the joint. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200mm.
Frequently asked questions
What is the CP?
The VEDA CP is a compression profile for floor expansion joints. Flexible expansion joints in thermoplastic vulcanizate or EPDM to be installed on floor, sealed with a special glue. Internal cell’s design allows up to 50% multidirectional movements while maintaining sufficient lift to absorb the traffic.
What joint gap widths does the CP cover?
It covers joint gaps up to 100 mm in 4 sizes: CP-025 for gaps up to 25 mm, CP-050 for gaps up to 50 mm, CP-075 for gaps up to 75 mm and CP-100 for gaps up to 100 mm.
How much movement can the CP accommodate?
Between ±12.5 and ±50 mm, depending on the model. The size table lists the movement for each model.
What is the CP made of?
It is made of EPDM and PVC. Colour and finish options: black. Version: flat only.
Is the CP compatible with fire protection?
Yes. It is compatible with VEDA fire protection solutions.
How is the load capacity of the CP defined?
The load-bearing capacity is based on the initial position of the joint. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the CP for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
PSO
Compression profile for vertical joints and non-trafficked horizontal joints
Joint covers & compression profiles
The VEDA PSO is a compression profile for vertical joints and non-trafficked horizontal joints. It covers joint gaps up to 110 mm and is made of nitrile.
Compression profile for joint gaps from 10 to 120 mm. Embedded or glue-down installation.
Standard colours: black, grey, beige. It can also be supplied in all possible RAL colours.
Depending on conditions of use such as resistance to oils and bitumen, large movements at extreme temperatures, fire resistance, physiologically safe, the PSO and PSR profiles can be manufactured from selected raw materials according to DIN 7865, ASTM D638 and ASTM D746.
PSO and PSR compression profiles are manufactured according to the DIN 18541 standard : elongation at break >350%, excellent resistance to chemicals and to ageing, permanent elasticity equivalent to that of natural rubber.
Black and Grey. Other colours available according to the RAL chart of colours or to match with specific sample. Please consult us
Economical product, quick installation
For horizontal (without traffic) and vertical joints
For joint gaps from 10 to 120 mm
Sizes and movement
PSO sizes: joint gap, movement and dimensions
Model
Joint gap W
Visible width S
Total width B
Height H
PSO 010
7 – 12 mm
15 mm
15 mm
15 mm
PSO 020
12 – 17 mm
20 mm
20 mm
20 mm
PSO 025
17 – 21 mm
25 mm
25 mm
20 mm
PSO 030
20 – 24 mm
30 mm
30 mm
24 mm
PSO 040
25 – 34 mm
40 mm
40 mm
30 mm
PSO 050
35 – 44 mm
50 mm
50 mm
40 mm
PSO 060
45 – 54 mm
60 mm
60 mm
40 mm
PSO 070
55 – 64 mm
70 mm
70 mm
45 mm
PSO 080
65 – 74 mm
80 mm
80 mm
55 mm
PSO 120
80 – 110 mm
120 mm
120 mm
70 mm
Specifications
Product type
Compression profile for vertical joints and non-trafficked horizontal joints
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
Nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 110 mm
Sizes available
10 models
Compatibility
VEDA fire protection solutions
Frequently asked questions
What is the PSO?
The VEDA PSO is a compression profile for vertical joints and non-trafficked horizontal joints. Embedded or glue-down installation. Standard colours: black, grey, beige.
What joint gap widths does the PSO cover?
It covers joint gaps up to 110 mm across 10 models, from PSO 010 to PSO 120. The size table lists the gap for each model.
What is the PSO made of?
It is made of nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the PSO compatible with fire protection?
Yes. It is compatible with VEDA fire protection solutions.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the PSO for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
PSR
Compression profile for vertical joints and non-trafficked horizontal joints
Joint covers & compression profiles
The VEDA PSR is a compression profile for vertical joints and non-trafficked horizontal joints. It covers joint gaps up to 42 mm and is made of nitrile and PVC.
Embedded flexible seals (they can be glued) for fast and cost-effective installation in vertical and horizontal joints, either indoors or outdoors. PSR seals have a cap-shaped top section that ensures a full covering of the joint, masking any possible irregularities in the joint.
Depending on conditions of use such as resistance to oils and bitumen, large movements at extreme temperatures, fire resistance, physiological harmlessness, the PSO and PSR profiles can be manufactured from selected raw materials according to DIN 7865, ASTM D638 and ASTM D746.
PSO and PSR compression profiles are manufactured according to the DIN 18541 standard : elongation at break >350%, excellent resistance to chemicals and to ageing, permanent elasticity equivalent to that of natural rubber.
Black and Grey. Other colours available according to the RAL chart of colours or to match with specific sample. Please consult us
Economical product, quick installation
For horizontal (without traffic) and vertical joints
For joint gaps from 10 to 90 mm
Sizes and movement
PSR sizes: joint gap, movement and dimensions
Model
Joint gap W
Visible width S
Total width B
Height H
PSR 010
7 – 12 mm
17 mm
17 mm
20 mm
PSR 015
9 – 15 mm
20 mm
20 mm
20 mm
PSR 020
13 – 17 mm
25 mm
25 mm
25 mm
PSR 025
17 – 22 mm
30 mm
30 mm
30 mm
PSR 030
19 – 25 mm
50 mm
50 mm
35 mm
PSR 035
19 – 25 mm
35 mm
35 mm
35 mm
PSR 040
20 – 35 mm
30 mm
30 mm
40 mm
PSR 050
25 – 34 mm
60 mm
60 mm
40 mm
PSR 055
24 – 29 mm
55 mm
55 mm
45 mm
PSR 060
25 – 30 mm
60 mm
60 mm
50 mm
PSR 090
35 – 42 mm
90 mm
90 mm
60 mm
PSR A 35
19 – 25 mm
40 mm
40 mm
35 mm
PSR A 60
25 – 30 mm
90 mm
90 mm
50 mm
Specifications
Product type
Compression profile for vertical joints and non-trafficked horizontal joints
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
Nitrile, PVC
Colour / finish
Black, grey, RAL colours
Version
Flat only
Joint gap
Up to 42 mm
Sizes available
13 models
Frequently asked questions
What is the PSR?
The VEDA PSR is a compression profile for vertical joints and non-trafficked horizontal joints. Embedded flexible seals (they can be glued) for fast and cost-effective installation in vertical and horizontal joints, either indoors or outdoors. PSR seals have a cap-shaped top section that ensures a full covering of the joint, masking any possible irregularities in the joint.
What joint gap widths does the PSR cover?
It covers joint gaps up to 42 mm across 13 models, from PSR 010 to PSR A 60. The size table lists the gap for each model.
What is the PSR made of?
It is made of nitrile and PVC. Colour and finish options: black, grey and RAL colours. Version: flat only.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the PSR for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
The clip affixed stainless steel joint covers are designed to provide an attractive and decorative solution to the problem of protecting and concealing expansion joints (façades, walls and ceilings).
Fast and easy to install: no drill or fixing required.
They are suitable for use in new or refurbishment projects, inside or outside. They can be installed in any kind of building: shopping malls, office buildings, hospitals, etc. They resist to agressive environments (corrosion, salty air, high temperature, frost, etc.).
To accomodate any of your needs, the following finishes are available: mill finish, brushed 220 grit, high gloss polished or leather-like stainless steel.
The following finishes are available: high gloss polished, mill finish, leather-like and brushed 220 grit
Aesthetic, decorative and economical
Quick and easy to install, no drilling or sealing needed
For joint gaps from 10 to 50 mm
Specifications
Product type
Clip-on stainless steel expansion joint cover
Category
Joint covers & compression profiles
Brand
VEDA (VEDA France)
Material
Stainless steel
Colour / finish
High gloss polished, mill finish, leather-like, brushed 220 grit
Version
Flat
Joint gap
From 10 to 50 mm
Compatibility
VEDA fire protection solutions
Frequently asked questions
What is the CJ Stainless steel?
The VEDA CJ Stainless steel is a clip-on stainless steel expansion joint cover.
What is the CJ Stainless steel made of?
It is made of stainless steel. Colour and finish options: high gloss polished, mill finish, leather-like and brushed 220 grit. Version: flat.
Is the CJ Stainless steel compatible with fire protection?
Yes. It is compatible with VEDA fire protection solutions.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the CJ Stainless steel for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.02
Seismic vertical expansion joint for façades, walls and ceilings
Facade, wall & ceiling · Seismic joints
The VEDA JDV 4.02 is a seismic vertical expansion joint for façades, walls and ceilings. It covers joint gaps up to 200 mm, accommodates movement of ±25 to ±100 mm and is made of aluminium.
Seismic vertical expansion joint in anodized aluminum, with pre-drilled side plates and a central plate to absorb large movements. Ideal for use on walls, facades and ceilings. Available in 3lm.
Seismic expansion joint
Vertical installation on facade, wall and ceiling
For joint gaps from 50 to 200 mm
Sizes and movement
JDV 4.02 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDV 4.02-040
40 mm
+25 / −25 mm
141 mm
141 mm
15.7 mm
JDV 4.02-050
50 mm
+40 / −40 mm
159 mm
159 mm
15.7 mm
JDV 4.02-060
60 mm
+40 / −40 mm
161 mm
161 mm
15.7 mm
JDV 4.02-080
80 mm
+40 / −40 mm
181 mm
181 mm
15.7 mm
JDV 4.02-100
100 mm
+78 / −78 mm
289 mm
289 mm
15.7 mm
JDV 4.02-120
120 mm
+78 / −78 mm
323 mm
323 mm
15.7 mm
JDV 4.02-150
150 mm
+78 / −78 mm
340 mm
340 mm
15.7 mm
JDV 4.02-180
180 mm
+100 / −100 mm
424 mm
424 mm
15.7 mm
JDV 4.02-200
200 mm
+100 / −100 mm
424 mm
424 mm
15.7 mm
Specifications
Product type
Seismic vertical expansion joint for façades, walls and ceilings
Category
Facade, wall & ceiling · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural, RAL colours
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
±25 to ±100 mm
Sizes available
9 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Details
JDV 4.02 seismic expansion joint for a perfect finish
This vertical expansion joint is specially designed for a high-quality finish with invisible fastenings. It is fastened on both sides with 4.5×50 mm stainless steel screws and 8×40 nylon plugs (the screws used vary according to the substrate). The JDV 4.02 seismic joint can also be powder-coated to blend in perfectly with the building. A corner anodized aluminium profile (JDV 4.02 A) is available to ensure aesthetic continuity with the flat model.
Seismic vertical expansion joint
This vertical expansion joint is available for initial openings from 40 to 200 mm (larger dimensions available on request). It accepts seismic movements of up to +100/-100 mm. Our JDV 4.02 seismic joint is compatible with JDH 6.22, JDH 6.24 and JDH 6.26 seismic expansion joints for floor, for example. Suitable for all types of building: railway stations, airports, shopping centers, universities ans other environments requiring reliable expansion jointing systems, etc. Quick and easy to install, an installation sheet is available on request for this vertical expansion joint.
Custom seismic joints
The dimensions of the JDV 4.02 seismic vertical expansion joints are available in the technical data sheet. Special dimensions are possible for large quantities.
JDV 4.02 aluminium joint covers installation
Check the opening of the seismic joint and determine the corresponding model from the technical data sheet.
If necessary, remove any material left in the joint. Surfaces must be clean and dry.
Check that joint edges are level.
Position the two side plates on either side of the vertical expansion joint and mark the holes.
Drill the holes. Vacuum supports and holes. Position fasteners.
Put 7 staples along the entire length of each 3lm of the seismic vertical expansion joint.
Position the central plate centered on the joint gap.
Clip on the first cap. Apply pressure with the palm of your hand evenly along the length. The installation of the covers should be done without resistance. Then clip on the second cap.
The JDV 4.02 vertical expansion joint is now in place. Take care to protect it during the construction phase.
Frequently asked questions
What is the JDV 4.02?
The VEDA JDV 4.02 is a seismic vertical expansion joint for façades, walls and ceilings. Seismic vertical expansion joint in anodized aluminum, with pre-drilled side plates and a central plate to absorb large movements. Ideal for use on walls, facades and ceilings.
What joint gap widths does the JDV 4.02 cover?
It covers joint gaps up to 200 mm across 9 models, from JDV 4.02-040 to JDV 4.02-200. The size table lists the gap for each model.
How much movement can the JDV 4.02 accommodate?
Between ±25 and ±100 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.02 made of?
It is made of aluminium. Colour and finish options: natural and RAL colours. Version: flat and angle.
Is the JDV 4.02 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.02 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.03
Seismic vertical expansion joint in aluminium
Facade, wall & ceiling · Seismic joints
The VEDA JDV 4.03 is a seismic vertical expansion joint in aluminium. It covers joint gaps up to 100 mm, accommodates movement of up to +50 / −90 mm and is made of aluminium.
Seismic vertical expansion joint in anodized aluminum for facades, walls and ceilings. Composed of a single support and an aluminum cover plate, this expansion jointing system absorbs expansion, contraction and shear movements.
Seismic expansion joint
Vertical installation on facade, wall and ceiling
For joint gaps from 30 to 100 mm
Sizes and movement
JDV 4.03 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDV 4.03-050
50 mm
+50 / −40 mm
150 mm
150 mm
7 mm
JDV 4.03-075
75 mm
+50 / −65 mm
175 mm
175 mm
7 mm
JDV 4.03-100
100 mm
+50 / −90 mm
200 mm
200 mm
7 mm
JDV 4.03-050A
50 mm
+50 / −35 mm
100 mm
100 mm
7 mm
JDV 4.03-075A
75 mm
+50 / −35 mm
125 mm
125 mm
7 mm
JDV 4.03-100A
100 mm
+50 / −85 mm
150 mm
150 mm
7 mm
Other widths upon request.
Specifications
Product type
Seismic vertical expansion joint in aluminium
Category
Facade, wall & ceiling · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural, RAL colours
Version
Flat and angle
Joint gap
Up to 100 mm
Movement
Up to +50 / −90 mm
Sizes available
6 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Details
An economical aluminium expansion joint
The simple design of this seismic expansion joint for interior walls and ceilings enables fast installation in renovation projects. It consists of fixing clips on one side of the expansion joint using 14 stainless steel screws 4.5×50 mm and nylon plugs 8×40 mm per 3 ml length, and a cover plate which is installed by pressing into the clips. Please note that it will be impossible to separate the cover plate from the clips without damaging the parts once the elements are engaged.
Seismic vertical expansion joint for aesthetic aspect
The design of the plate makes the fasteners completely invisible for a perfect finish. The earthquake expansion joint can also be powder-coated to blend in perfectly with the building. The corner model (JDV 4.03 A) is available to ensure continuity with the flat model. The JDV 4.03 aluminium expansion joint is suitable for interior applications, and can be combined with our floor joint covers such as CJE-PF, or JDH 6.17. Please consult us to identify compatible expansion joint profiles.
Vertical expansion joint for interior applications
The JDV 4.03 seismic vertical expansion joint is suitable for all types of application: expansion joints in concrete, stone and tiled walls. It is suitable for all types of buildings: stadiums, shopping centers, universities, hospitals, etc.
For exterior applications, we recommend our JDV 4.02 expansion joint. This is also a vertical expansion joint that can be fastened on 2 sides with concrete screws for special buildings such as prisons for example.
Frequently asked questions
What is the JDV 4.03?
The VEDA JDV 4.03 is a seismic vertical expansion joint in aluminium. Seismic vertical expansion joint in anodized aluminum for facades, walls and ceilings. Composed of a single support and an aluminum cover plate, this expansion jointing system absorbs expansion, contraction and shear movements.
What joint gap widths does the JDV 4.03 cover?
It covers joint gaps up to 100 mm in 6 sizes: JDV 4.03-050 for gaps up to 50 mm, JDV 4.03-075 for gaps up to 75 mm, JDV 4.03-100 for gaps up to 100 mm, JDV 4.03-050A for gaps up to 50 mm, JDV 4.03-075A for gaps up to 75 mm and JDV 4.03-100A for gaps up to 100 mm.
How much movement can the JDV 4.03 accommodate?
Up to +50 / −90 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.03 made of?
It is made of aluminium. Colour and finish options: natural and RAL colours. Version: flat and angle.
Is the JDV 4.03 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.03 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.04
Vertical expansion joint for installation under plaster
Facade, wall & ceiling
The VEDA JDV 4.04 is a vertical expansion joint for installation under plaster. It covers joint gaps up to 50 mm, accommodates movement of up to +25 / −30 mm and is made of galvanized steel, thermoplastic polymer and nitrile.
The JDV 4.04 expansion joint is suitable for façades, walls and ceilings. It consists of two pre-drilled thermoplastic polymer or galvanized steel side plates and a flexible, interchangeable nitrile insert to absorb small multidirectional movements.
Seismic expansion joint
Under plaster installation
For joint gaps from 30 to 50 mm
Sizes and movement
JDV 4.04 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDV 4.04-030
30 mm
+5 / −2 mm
37 mm
137 mm
11 / 14 / 20 mm
JDV 4.04-050
50 mm
+25 / −30 mm
67 mm
163 mm
11 / 14 / 20 mm
Specifications
Product type
Vertical expansion joint for installation under plaster
Category
Facade, wall & ceiling
Brand
VEDA (VEDA France)
Material
Galvanized steel, thermoplastic polymer, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 50 mm
Movement
Up to +25 / −30 mm
Sizes available
2 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Details
JDV 4.04 joint specifications
The JDV 4.04 is an expansion joint under plaster or façade rendering and can be installed either flat or at an angle. Both models are available on our technical data sheet. It is economical, practical and easy to install. This vertical expansion joint is available for 30 and 50mm openings (other width available upon request). Several heights are available: 11, 14 and 20mm. Furthermore, the nitrile insert is available in different colors: black, grey or creamy white. This expansion joint with insert is available in 3lm lengths.
How to install an expansion joint under plaster?
JDV 4.04 thermoplastic polymer or galvanized steel expansion joints should be installed at temperatures between +5° and +40°.
Check that the expansion joint is dry, clean and free of grease.
Glue the expansion joint using a bonding agent or coating suited to the substrate and metal fins.
If necessary, fix the expansion joint with insert using VB-TF 6.6×60 concrete screws.
Thermally weld the nitrile inserts together to ensure a proper connection between lengths.
Protect the insert with adhesive tape to avoid clogging when spraying plaster.
Apply sprayed plaster to facade, wall or ceiling.
Smooth surfaces.
Remove tape from nitrile insert.
The under-plaster expansion joint is now installed. Please protect it during the construction phase.
The coating is not supplied by Veda France.
Why use an expansion joint?
Buildings undergo movement throughout their lifetime. The origins of these movements are varied: shrinkage of concrete, expansion and contraction of structures, settlement of the structure, movements generated by the environment (trains, planes, wind, rain, etc.), earthquakes. Expansion joints must be created to maintain the durability of a large-scale construction over time. This is an empty space, free of any material, between two parts of a structure. They run the full height of the structure, allowing each element to move freely to avoid colliding. It is dimensioned according to the possible deformations of the construction. Whether standard or earthquake-resistant, an expansion joint must allow for horizontal, vertical and/or shear movements. In the case of our JDV 4.04 steel expansion joint, the movements absorbed are multidirectional.
Expansion joints on walls and facades
The vertical expansion joint is fixed to the entire height of the building. We offer a wide range of expansion joints to meet all your requirements: seismic or standard expansion joints, galvanised steel or aluminum expansion joints with insert or without, for small or large openings, expansion joint under plaster, embedded or surface mounted, etc. All our facade and wall expansion joints are perfectly compatible with our range of firestop joints: VEDAFEU C firestop cords.
Frequently asked questions
What is the JDV 4.04?
The VEDA JDV 4.04 is a vertical expansion joint for installation under plaster. The JDV 4.04 expansion joint is suitable for façades, walls and ceilings. It consists of two pre-drilled thermoplastic polymer or galvanized steel side plates and a flexible, interchangeable nitrile insert to absorb small multidirectional movements.
What joint gap widths does the JDV 4.04 cover?
It covers joint gaps up to 50 mm in 2 sizes: JDV 4.04-030 for gaps up to 30 mm and JDV 4.04-050 for gaps up to 50 mm.
How much movement can the JDV 4.04 accommodate?
Up to +25 / −30 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.04 made of?
It is made of galvanized steel, thermoplastic polymer and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDV 4.04 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.04 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.06
Vertical expansion joint for walls, ceilings and façades
Facade, wall & ceiling
The VEDA JDV 4.06 is a vertical expansion joint for walls, ceilings and façades. It covers joint gaps up to 60 mm, accommodates movement of up to +10 / −10 mm and is made of aluminium and nitrile.
The ceiling, wall and facade expansion joint is made up of two raw aluminum side plates and a flexible nitrile insert. The side plates are covered with cellular foam to compensate for surface irregularities. This system is part of our wide range of expansion jointing solutions designed to absorb structural movements.
Vertical installation on facade, wall and ceiling expansion joint
For joint gaps up to 60 mm (larger widths available on request)
Sizes and movement
JDV 4.06 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
JDV 4.06-020
20 mm
+3 / −3 mm
140 mm
140 mm
JDV 4.06-030
30 mm
+7 / −7 mm
150 mm
150 mm
JDV 4.06-040
40 mm
+10 / −10 mm
160 mm
160 mm
JDV 4.06-050
50 mm
+7 / −7 mm
180 mm
180 mm
JDV 4.06-060
60 mm
+1−10 mm
190 mm
190 mm
Specifications
Product type
Vertical expansion joint for walls, ceilings and façades
Category
Facade, wall & ceiling
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 60 mm
Movement
Up to +10 / −10 mm
Sizes available
5 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Details
How to install a wall or facade expansion joint?
Installing an expansion joint between 2 concrete walls is quick and easy.
Clear the body of the expansion joint. Surfaces must be clean and dry.
Position the two aluminum side plates on either side of the facade expansion joint. Spacing can be adjusted with small pieces of insert.
Drill the holes. Diameter and depth will vary according to substrate and screw type.
Vacuum supports and holes. Insert dowels and screws.
Position the insert roller, using a mallet and soapy water if necessary.
Heat-weld the inserts for the connections.
Take care to protect the wall expansion joint during the construction phase.
Waterproofing expansion joint
VED’EPDM waterproofing membrane is used to seal walls, facades and ceiling expansion joints. It is installed after the firestop solution, if required, and before the expansion joint cover. It is fixed in an omega shape on either side of the expansion joint, using our MS adhesive. To ensure a perfect seal between floor, walls and ceilings, a minimum 150mm rise is required between floor and walls, and walls and ceilings.
How to hide a ceiling expansion joint?
Ceiling expansion joints are a continuation of wall and floor expansion joints. Our expansion joint profiles provide an aesthetically pleasing finish, protect the joint so as not to affect movement, and ensure safe passage for pedestrians and vehicles on the floor. All JDV products can be installed on walls, facades and ceilings. The installation method is the same as above. Depending on the opening and expected movements, you will find the ceilng, wall and façade expansion joint perfectly suited to your configuration.
Frequently asked questions
What is the JDV 4.06?
The VEDA JDV 4.06 is a vertical expansion joint for walls, ceilings and façades. The ceiling, wall and facade expansion joint is made up of two raw aluminum side plates and a flexible nitrile insert. The side plates are covered with cellular foam to compensate for surface irregularities.
What joint gap widths does the JDV 4.06 cover?
It covers joint gaps up to 60 mm in 5 sizes: JDV 4.06-020 for gaps up to 20 mm, JDV 4.06-030 for gaps up to 30 mm, JDV 4.06-040 for gaps up to 40 mm, JDV 4.06-050 for gaps up to 50 mm and JDV 4.06-060 for gaps up to 60 mm.
How much movement can the JDV 4.06 accommodate?
Up to +10 / −10 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.06 made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDV 4.06 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.06 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.07
Seismic vertical expansion joint for façades, walls and ceilings
Facade, wall & ceiling · Seismic joints
The VEDA JDV 4.07 is a seismic vertical expansion joint for façades, walls and ceilings. It covers joint gaps up to 600 mm, accommodates movement of ±25 to ±300 mm and is made of aluminium and TPV.
Seismic vertical expansion joint for facades, walls and ceilings. Suitable for joint openings from 50 mm to 600mm. Our JDV 4.07 can absorb large multidirectional movements of up to 50%. It is supplied in 3 linear meter lengths and composed of two side plates and a TPV or epdm expansion joint insert.
Seismic aluminium and TPV or EPDM expansion joint system
Vertical installation on facade, wall and ceiling
For joint gaps up to 600 mm
Sizes and movement
JDV 4.07 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDV 4.07-050
50 mm
+25 / −25 mm
50 mm
50 mm
51 mm
JDV 4.07-075
75 mm
+37.5 / −37.5 mm
75 mm
75 mm
51 mm
JDV 4.07-100
100 mm
+50 / −50 mm
100 mm
100 mm
51 mm
JDV 4.07-125
125 mm
+62.5 / −62.5 mm
125 mm
125 mm
51 mm
JDV 4.07-150
150 mm
+75 / −75 mm
150 mm
150 mm
80 mm
JDV 4.07-200
200 mm
+100 / −100 mm
200 mm
200 mm
80 mm
JDV 4.07-300
300 mm
+150 / −150 mm
300 mm
300 mm
80 mm
JDV 4.07-350
350 mm
+175 / −175 mm
350 mm
350 mm
80 mm
JDV 4.07-400
400 mm
+200 / −200 mm
400 mm
400 mm
80 mm
JDV 4.07-500
500 mm
+250 / −250 mm
500 mm
500 mm
80 mm
JDV 4.07-600
600 mm
+300 / −300 mm
600 mm
600 mm
80 mm
Specifications
Product type
Seismic vertical expansion joint for façades, walls and ceilings
Category
Facade, wall & ceiling · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium, TPV
Colour / finish
Black, grey, beige
Version
Flat and angle
Joint gap
Up to 600 mm
Movement
±25 to ±300 mm
Sizes available
11 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Details
Aluminium and TPV or EPDM expansion joints
The JDV 4.07 expansion joint profile is a flush-mounted solution for a perfect, inconspicuous finish. It consists of two aluminum side plates and an EPDM or TPV (vulcanized thermoplastic) gasket. Thanks to its design, this expansion joint with insert is suitable for both flat and angled applications. For openings greater than 100mm, it features a self-centering bar to ensure that the insert remains in place despite wide product movements. This seismic vertical expansion joint allows movements of +50% / -50%. Several insert colors are available: black, gray, beige. Our JDV 4.07 expansion joint is also suitable for buildings with external insulation. Please consult us for such an application.
A seismic expansion joint differs from a standard expansion joint as the former accepts more expansion, contraction, vertical and shear movements.
An expansion joint is sized according to the expected deformations of the building. The origins of movements are varied: concrete shrinkage (fractional joints), internal and external temperatures, structural settlement, movements generated by the environment (wind, rain, planes, trains, etc.), earthquakes. The design office specifies the expected movements of the expansion joint and the number of linear meters expected in the building. In this way, in the event of building movements, the various modules can move independently of each other to avoid damage or even collapse of the structure. To help you choose the right profiles for your configuration, visit the Selection Tool page.
Nitrile, TPV or EPDM expansion joints usually allows smaller movements because they are not very extensible, unlike all-metal expansion joints.
Frequently asked questions
What is the JDV 4.07?
The VEDA JDV 4.07 is a seismic vertical expansion joint for façades, walls and ceilings. Suitable for joint openings from 50 mm to 600mm. Our JDV 4.07 can absorb large multidirectional movements of up to 50%.
What joint gap widths does the JDV 4.07 cover?
It covers joint gaps up to 600 mm across 11 models, from JDV 4.07-050 to JDV 4.07-600. The size table lists the gap for each model.
How much movement can the JDV 4.07 accommodate?
Between ±25 and ±300 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.07 made of?
It is made of aluminium and TPV. Colour and finish options: black, grey and beige. Version: flat and angle.
Is the JDV 4.07 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.07 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.08
Vertical expansion joint for external thermal insulation
Facade, wall & ceiling
The VEDA JDV 4.08 is a vertical expansion joint for external thermal insulation. It covers joint gaps up to 30 mm, accommodates movement of ±5 mm and is made of PVC and nitrile.
Vertical expansion joint profile especially designed to absorb thermal movement in buildings with external insulation.
This profile is composed of : A fiber meshstrip for a better adhesion, a nitrile sealing layer for waterproofing and UV resistant PVC profiles trim.
This thermal expansion joint is suited for vertical joints in façades with a gap up to 30 mm. Section length of 2.5 m
Made of rigid PVC side and central sections and Nitrile membrane, it is adapted for most building materials
Vertical expansion joint
For external thermal insulation
For joint gaps of 30 mm
Sizes and movement
JDV 4.08 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDV 4.08-030
30 mm
+5 / −5 mm
32 mm
285 mm
50 mm
Specifications
Product type
Vertical expansion joint for external thermal insulation
Category
Facade, wall & ceiling
Brand
VEDA (VEDA France)
Material
PVC, nitrile
Colour / finish
White
Version
Flat and angle
Joint gap
Up to 30 mm
Movement
±5 mm
Sizes available
1 model
Compatibility
VEDA fire protection solutions
Frequently asked questions
What is the JDV 4.08?
The VEDA JDV 4.08 is a vertical expansion joint for external thermal insulation. Vertical expansion joint profile especially designed to absorb thermal movement in buildings with external insulation. This profile is composed of : A fiber meshstrip for a better adhesion, a nitrile sealing layer for waterproofing and UV resistant PVC profiles trim.
What joint gap widths does the JDV 4.08 cover?
It covers joint gaps up to 30 mm.
How much movement can the JDV 4.08 accommodate?
It accommodates ±5 mm of movement.
What is the JDV 4.08 made of?
It is made of PVC and nitrile. Colour and finish options: white. Version: flat and angle.
Is the JDV 4.08 compatible with fire protection?
Yes. It is compatible with VEDA fire protection solutions.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.08 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.10
All-metal seismic vertical expansion joint
Facade, wall & ceiling · Seismic joints
The VEDA JDV 4.10 is an all-metal seismic vertical expansion joint. It covers joint gaps up to 200 mm, accommodates movement of ±25 to ±100 mm and is made of aluminium.
All metal vertical seismic expansion joint for train stations, airports, shopping centre... This range is design with springs to allow seismic movements.
Expansion joint special wide seismic movements
Vertical installation on facade, wall and ceiling
For joint gaps from 50 to 200 mm
Sizes and movement
JDV 4.10 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDV 4.10-050
50 mm
+25 / −25 mm
170 mm
170 mm
16.5 mm
JDV 4.10-100
100 mm
+50 / −50 mm
220 mm
220 mm
16.5 mm
JDV 4.10-150
150 mm
+75 / −75 mm
270 mm
270 mm
25 mm
JDV 4.10-200
200 mm
+100 / −100 mm
320 mm
320 mm
25 mm
JDV 4.10-050 A
50 mm
+25 / −25 mm
110 mm
110 mm
16.5 mm
JDV 4.10-100 A
100 mm
+50 / −50 mm
160 mm
160 mm
16.5 mm
JDV 4.10-150 A
150 mm
+75 / −75 mm
210 mm
210 mm
25 mm
JDV 4.10-200 A
200 mm
+100 / −100 mm
260 mm
260 mm
25 mm
Specifications
Product type
All-metal seismic vertical expansion joint
Category
Facade, wall & ceiling · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural, RAL colours
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
±25 to ±100 mm
Sizes available
8 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Frequently asked questions
What is the JDV 4.10?
The VEDA JDV 4.10 is an all-metal seismic vertical expansion joint. All metal vertical seismic expansion joint for train stations, airports, shopping centre... This range is design with springs to allow seismic movements.
What joint gap widths does the JDV 4.10 cover?
It covers joint gaps up to 200 mm across 8 models, from JDV 4.10-050 to JDV 4.10-200 A. The size table lists the gap for each model.
How much movement can the JDV 4.10 accommodate?
Between ±25 and ±100 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.10 made of?
It is made of aluminium. Colour and finish options: natural and RAL colours. Version: flat and angle.
Is the JDV 4.10 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.10 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.190
Seismic vertical expansion joint for interior walls and ceilings
Facade, wall & ceiling · Seismic joints
The VEDA JDV 4.190 is a seismic vertical expansion joint for interior walls and ceilings. It covers joint gaps up to 200 mm, accommodates movement of ±40 to ±100 mm and is made of aluminium.
Vertical aluminium expansion joint for walls and ceilings. Aesthetic solution for any kind of building: train stations, airports, malls...
Specially designed for drywalls, plasterboards… finishes.
Expansion joint with 50% movement
Expansion joint for indoor use: walls and ceilings
For joint widths from 80 to 200 mm
Sizes and movement
JDV 4.190 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDV 4.190-080
80 mm
+40 / −40 mm
348 mm
348 mm
16 / 20 mm
JDV 4.190-100
100 mm
+50 / −50 mm
348 mm
348 mm
16 / 20 mm
JDV 4.190-150
150 mm
+75 / −75 mm
406 mm
406 mm
16 / 20 mm
JDV 4.190-200
200 mm
+100 / −100 mm
456 mm
456 mm
16 / 20 mm
Specifications
Product type
Seismic vertical expansion joint for interior walls and ceilings
Category
Facade, wall & ceiling · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
±40 to ±100 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Details
The JDV 4.190 seismic vertical expansion joint
The JDV 4.190 seismic expansion joint is suitable for openings ranging from 80 mm to 200 mm. This recessed profile is aesthetically pleasing due to its discreet design and is intended to be covered with lightweight wall coverings. Self-centering, it accommodates movements of ±50%. The JDV 4.190 vertical expansion joint thus absorbs movements of up to ±100 mm.
This profile aligns perfectly with the JDH 5.190 floor expansion joint. Mechanical fasteners secure the profiles to the floor, interior walls, and ceiling. Depending on project requirements, the S dimensions of the profiles can be adjusted. Please consult us.
What is a vertical expansion joint?
A vertical expansion joint is an empty space, free of any material between two parts of a structure. These joints run the full height of a building. They are essential in large buildings because they help prevent cracks or damage to the structure over time. Seismic or standard expansion joints are designed to accommodate varying degrees of contraction, expansion, and shear movements. The engineering office determines the expected openings and movements of the expansion joints.
Vertical expansion joints are protected by profiles. At VEDA FRANCE, we offer a wide range of solutions: flexible sealing profiles such as our PSO in nitrile, cost-effective joint covers such as our CJP, expansion joints for small expansion movements such as our JDV 4.06, and more. Please feel free to contact our team for assistance in selecting the vertical expansion joint best suited to your needs.
Frequently asked questions
What is the JDV 4.190?
The VEDA JDV 4.190 is a seismic vertical expansion joint for interior walls and ceilings. Aesthetic solution for any kind of building: train stations, airports, malls... Specially designed for drywalls, plasterboards… finishes.
What joint gap widths does the JDV 4.190 cover?
It covers joint gaps up to 200 mm in 4 sizes: JDV 4.190-080 for gaps up to 80 mm, JDV 4.190-100 for gaps up to 100 mm, JDV 4.190-150 for gaps up to 150 mm and JDV 4.190-200 for gaps up to 200 mm.
How much movement can the JDV 4.190 accommodate?
Between ±40 and ±100 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.190 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDV 4.190 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.190 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.12
All-metal seismic expansion joint for ceilings
Facade, wall & ceiling · Seismic joints
The VEDA JDV 4.12 is an all-metal seismic expansion joint for ceilings. It covers joint gaps up to 200 mm, accommodates movement of ±25 to ±100 mm and is made of aluminium.
All-metal expansion joint for railway stations, airports, shopping centers…
Expansion joint special wide seismic movements
Vertical installation on facade, wall and ceiling
For joint gaps from 50 to 200 mm
Sizes and movement
JDV 4.12 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDV 4.12-050
50 mm
+25 / −25 mm
170 mm
170 mm
16.5 mm
JDV 4.12-100
100 mm
+50 / −50 mm
220 mm
220 mm
16.5 mm
JDV 4.12-150
150 mm
+75 / −75 mm
270 mm
270 mm
17.5 mm
JDV 4.12-200
200 mm
+100 / −100 mm
320 mm
320 mm
17.5 mm
JDV 4.12-050 A
50 mm
+25 / −25 mm
110 mm
110 mm
16.5 mm
JDV 4.12-100 A
100 mm
+50 / −50 mm
160 mm
160 mm
16.5 mm
JDV 4.12-150 A
150 mm
+75 / −75 mm
210 mm
210 mm
17.5 mm
JDV 4.12-200 A
200 mm
+100 / −100 mm
260 mm
260 mm
17.5 mm
Specifications
Product type
All-metal seismic expansion joint for ceilings
Category
Facade, wall & ceiling · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural, RAL colours
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
±25 to ±100 mm
Sizes available
8 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Frequently asked questions
What is the JDV 4.12?
The VEDA JDV 4.12 is an all-metal seismic expansion joint for ceilings. Flat and angle models are available.
What joint gap widths does the JDV 4.12 cover?
It covers joint gaps up to 200 mm across 8 models, from JDV 4.12-050 to JDV 4.12-200 A. The size table lists the gap for each model.
How much movement can the JDV 4.12 accommodate?
Between ±25 and ±100 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.12 made of?
It is made of aluminium. Colour and finish options: natural and RAL colours. Version: flat and angle.
Is the JDV 4.12 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.12 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.14
Expansion joint for false and suspended ceilings
Facade, wall & ceiling
The VEDA JDV 4.14 is an expansion joint for false and suspended ceilings. It covers joint gaps up to 100 mm, accommodates movement of up to +45 / −20 mm and is made of aluminium and nitrile.
Expansion joint for false ceilings, comprising aluminium side sections and an interchangeable insert in the centre, able to take up large multidirectional movements. Specially suitable for suspended ceilings.
For joints in false ceilings or suspended ceilings with a gap up to 100 mm.
Section length of 4 m
Aluminium side angle sections
Top quality flexible PVC insert (Vedaflex)
Flat and corner
Black or gray insert. Other RAL colours available on request
Seismic expansion joint
Special suspended ceilings
For joint gaps from 30 to 100 mm
Sizes and movement
JDV 4.14 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDV 4.14-030
30 mm
+8 / −2 mm
60 mm
60 mm
50 mm
JDV 4.14-050
50 mm
+20 / −10 mm
80 mm
80 mm
50 mm
JDV 4.14-080
80 mm
+30 / −15 mm
110 mm
110 mm
50 mm
JDV 4.14-100
100 mm
+45 / −20 mm
130 mm
130 mm
50 mm
Specifications
Product type
Expansion joint for false and suspended ceilings
Category
Facade, wall & ceiling
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey
Version
Flat and angle
Joint gap
Up to 100 mm
Movement
Up to +45 / −20 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Frequently asked questions
What is the JDV 4.14?
The VEDA JDV 4.14 is an expansion joint for false and suspended ceilings. Expansion joint for false ceilings, comprising aluminium side sections and an interchangeable insert in the centre, able to take up large multidirectional movements. Specially suitable for suspended ceilings.
What joint gap widths does the JDV 4.14 cover?
It covers joint gaps up to 100 mm in 4 sizes: JDV 4.14-030 for gaps up to 30 mm, JDV 4.14-050 for gaps up to 50 mm, JDV 4.14-080 for gaps up to 80 mm and JDV 4.14-100 for gaps up to 100 mm.
How much movement can the JDV 4.14 accommodate?
Up to +45 / −20 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.14 made of?
It is made of aluminium and nitrile. Colour and finish options: black and grey. Version: flat and angle.
Is the JDV 4.14 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.14 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDV 4.16
Seismic expansion joint for suspended ceilings
Facade, wall & ceiling · Seismic joints
The VEDA JDV 4.16 is a seismic expansion joint for suspended ceilings. It covers joint gaps up to 250 mm, accommodates movement of ±25 to ±125 mm and is made of aluminium and vulcanized thermoplastic.
Seismic expansion joint for suspended ceilings with 50% movement.
Composed of two aluminum side plates and a flexible TPV insert. A self-centering pivot is available for openings of 150 mm and above, to ensure a better hold.
Hooks are not supplied with the ceiling expansion joint
Seismic expansion joint
For suspended ceilings
For openings up to 250 mm
Sizes and movement
JDV 4.16 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Height H
JDV 4.16-050
50 mm
+25 / −25 mm
70 mm
30 mm
JDV 4.16-075
75 mm
+37.5 / −37.5 mm
95 mm
30 mm
JDV 4.16-100
100 mm
+50 / −50 mm
120 mm
30 mm
JDV 4.16-125
145 mm
+62.5 / −62.5 mm
145 mm
30 mm
JDV 4.16-150
150 mm
+75 / −75 mm
170 mm
30 mm
JDV 4.16-200
200 mm
+100 / −100 mm
220 mm
30 mm
JDV 4.16-250
250 mm
−125 / −125 mm
270 mm
30 mm
Specifications
Product type
Seismic expansion joint for suspended ceilings
Category
Facade, wall & ceiling · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium, vulcanized thermoplastic
Colour / finish
Black, grey
Version
Flat and angle
Joint gap
Up to 250 mm
Movement
±25 to ±125 mm
Sizes available
7 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Details
Seismic expansion joint with insert
This metal expansion joint is suitable for all suspended false ceilings in buildings: railway stations, airports, shopping centers, etc. It is easy to install using hooks (not supplied with the expansion joint profile). We offer both flat and angled models to cover the entire ceiling. Our JDV 4.16 is available in 3 linear meter lengths.
Embedded accordion ceiling expansion joint
Specially designed for suspended ceilings, this aluminium suspended ceiling absorbs large multidirectional movements thanks to its flexible insert. In addition to ensuring expansion, contraction and shearing movements, this suspended ceiling profiles is aesthetically pleasing. To ensure continuity with the wall, it can be combined with our JDV 4.07 wall expansion joint (with visible or invisible anodized aluminum side plates and vulcanized thermoplastic accordion insert). The inserts of these two building expansion joints can thus be heat-welded together.
To ensure gas-tightness, flame-tightness and thermal insulation (EI), we recommend to install a firestop product such as our blanket VEDAFEU SV in the joint.
If waterproofing is required, we recommend our VED’EPDM membrane.
Ceiling expansion joint features
Joint width: up to 250 mm
Permissible movements: up to ± 125 mm
Self-centering pivot: available from 150 mm opening
Standard length: 3 ml
Insert color: black (other colors available on request).
How to hide a ceiling expansion joint?
This seismic expansion joint system has not just an aesthetic function: it also protects the joint from impurities. Depending on the size of the joint, different solutions are available, such as mastics, foams or expansion joint in building (embedded or surface mounted profile). Most of our metal expansion joint are mechanically fastened with screws. Some are fixed with clips, like our clip-on joint covers, and others with glue.
Seismic expansion joints are durable products. In fact, if the product :
respects the various movements of the building
the expected floor loads (for a floor expansion joint)
is properly protected during the construction phase
is correctly installed with the right accessories
the material is environmentally friendly
then the building expansion joint can last for decades.
Frequently asked questions
What is the JDV 4.16?
The VEDA JDV 4.16 is a seismic expansion joint for suspended ceilings. Composed of two aluminum side plates and a flexible TPV insert. A self-centering pivot is available for openings of 150 mm and above, to ensure a better hold.
What joint gap widths does the JDV 4.16 cover?
It covers joint gaps up to 250 mm across 7 models, from JDV 4.16-050 to JDV 4.16-250. The size table lists the gap for each model.
How much movement can the JDV 4.16 accommodate?
Between ±25 and ±125 mm, depending on the model. The size table lists the movement for each model.
What is the JDV 4.16 made of?
It is made of aluminium and vulcanized thermoplastic. Colour and finish options: black and grey. Version: flat and angle.
Is the JDV 4.16 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDV 4.16 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.02
Aluminium floor expansion joint with flexible insert
Floor joints with flexible insert
The VEDA JDH 5.02 is an aluminium floor expansion joint with flexible insert. It covers joint gaps up to 60 mm, accommodates movement of ±3 to ±10 mm and is made of aluminium and nitrile.
Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints. Suitable for light traffic, and also for traffic of light trucks on pneumatic tyres and non-intense traffic of light vehicles.
Section length of 3 lm. Flexible nitrile insert, interchangeable
Aluminium side angle sections, pre-drilled
Floor-to-floor type, and floor-to-wall type with exposed skirting , hidden skirting and hidden and offset skirting
Black or gray inserts, plain (special hospital environment) available only for the JDH5.02-050. The plain option reduces the movement range.
Special parts on demand (T, X, L…)
Standard floor expansion joint
Available insert: smooth
For joint gaps up to 60 mm
Sizes and movement
JDH 5.02 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.02-020
20 mm
+3 / −3 mm
25 mm
85 mm
15 / 20 mm
JDH 5.02-030
30 mm
+7 / −7 mm
35 mm
95 mm
15 / 20 mm
JDH 5.02-040
40 mm
+10 / −10 mm
45 mm
105 mm
15 / 20 mm
JDH 5.02-050
50 mm
+7 / −7 mm
50 / 55 mm
160 mm
20 / 26 / 35 / 40 / 50 mm
JDH 5.02-060
60 mm
+10 / −10 mm
60 / 65 mm
170 mm
20 / 26 / 35 / 40 / 50 mm
Specifications
Product type
Aluminium floor expansion joint with flexible insert
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 60 mm
Movement
±3 to ±10 mm
Sizes available
5 models
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.02?
The VEDA JDH 5.02 is an aluminium floor expansion joint with flexible insert. Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
What joint gap widths does the JDH 5.02 cover?
It covers joint gaps up to 60 mm in 5 sizes: JDH 5.02-020 for gaps up to 20 mm, JDH 5.02-030 for gaps up to 30 mm, JDH 5.02-040 for gaps up to 40 mm, JDH 5.02-050 for gaps up to 50 mm and JDH 5.02-060 for gaps up to 60 mm.
How much movement can the JDH 5.02 accommodate?
Between ±3 and ±10 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.02 made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
How is the load capacity of the JDH 5.02 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.02 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.02 with caps
Aluminium floor expansion joint with caps
Floor joints with flexible insert
The VEDA JDH 5.02 with caps is an aluminium floor expansion joint with caps. It covers joint gaps up to 60 mm, accommodates movement of ±7 to ±10 mm and is made of aluminium and nitrile.
Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
Standard floor expansion joint
Available insert: smooth
For joint gaps up to 60 mm
Sizes and movement
JDH 5.02 with caps sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.02-050
50 mm
+7 / −7 mm
50 mm
165 mm
36 / 41 / 51 mm
JDH 5.02-060
60 mm
+10 / −10 mm
65 mm
175 mm
36 / 41 / 51 mm
Specifications
Product type
Aluminium floor expansion joint with caps
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 60 mm
Movement
±7 to ±10 mm
Sizes available
2 models
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.02 with caps?
The VEDA JDH 5.02 with caps is an aluminium floor expansion joint with caps. Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
What joint gap widths does the JDH 5.02 with caps cover?
It covers joint gaps up to 60 mm in 2 sizes: JDH 5.02-050 for gaps up to 50 mm and JDH 5.02-060 for gaps up to 60 mm.
How much movement can the JDH 5.02 with caps accommodate?
Between ±7 and ±10 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.02 with caps made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
How is the load capacity of the JDH 5.02 with caps defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.02 with caps for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.04
Reinforced aluminium floor expansion joint with flexible insert
Floor joints with flexible insert
The VEDA JDH 5.04 is a reinforced aluminium floor expansion joint with flexible insert. It covers joint gaps up to 60 mm, accommodates movement of ±7 to ±10 mm and is made of aluminium and nitrile.
Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints. Suitable for medium heavy traffic, and also for traffic of fork-lift trucks on pneumatic tyres and intense traffic of light vehicles.
Section length of 3 m. Flexible nitrile insert, interchangeable
Aluminium side angle sections, pre-drilled
Floor-to-floor type, and floor-to-wall type with exposed skirting and hidden skirting
Black or gray inserts, plain (special hospital environment) or ribbed surface. The plain option reduces the movement range
Special parts on demand (T, X, L…)
Reinforced floor expansion joint
Available insert: smooth
For joint gaps from 30 to 60 mm
Sizes and movement
JDH 5.04 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.04-050
50 mm
+7 / −7 mm
68 mm
198 mm
35 / 50 mm
JDH 5.04-060
60 mm
+10 / −10 mm
78 mm
208 mm
35 / 50 mm
Specifications
Product type
Reinforced aluminium floor expansion joint with flexible insert
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 60 mm
Movement
±7 to ±10 mm
Sizes available
2 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.04?
The VEDA JDH 5.04 is a reinforced aluminium floor expansion joint with flexible insert. Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
What joint gap widths does the JDH 5.04 cover?
It covers joint gaps up to 60 mm in 2 sizes: JDH 5.04-050 for gaps up to 50 mm and JDH 5.04-060 for gaps up to 60 mm.
How much movement can the JDH 5.04 accommodate?
Between ±7 and ±10 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.04 made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDH 5.04 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.04 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.04 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.06
Wide aluminium floor expansion joint with flexible insert
Floor joints with flexible insert
The VEDA JDH 5.06 is a wide aluminium floor expansion joint with flexible insert. It covers joint gaps up to 170 mm, accommodates movement of up to +25 / −15 mm and is made of aluminium and nitrile.
Seismic floor expansion joint, comprising aluminium side angle sections connected by an interchangeable flexible insert in the centre with plain surface, available in black or grey (other colours on request), able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints. Suitable for light traffic of pedestrians, and also for traffic of light trucks, and in the case of the type ref. JDH 5.06-100, for non-intense traffic of light vehicles.
Section length of 4 m. Flexible nitrile insert, interchangeable
Aluminium side angle sections, pre-drilled
Floor-to-floor type, and floor-to-wall type with exposed skirting and hidden skirting (type EV)
Black or gray plain surface inserts for easier maintenance (specially suitable for hospital environment)
Special parts on demand (T, X, L…)
Wide floor expansion joint
For joint gaps from 100 to 200 mm
Sizes and movement
JDH 5.06 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.06-100
100 mm
+15 / −5 mm
135 mm
225 / 245 mm
20 / 35 / 40 / 50 / 55 / 60 / 80 / 100 mm
JDH 5.06-140
140 mm
+20 / −10 mm
170 mm
260 / 285 mm
20 / 35 / 40 / 50 / 55 / 60 / 80 / 100 mm
JDH 5.06-170
170 mm
+25 / −15 mm
200 mm
285 / 305 mm
35 / 40 / 50 / 55 / 60 / 80 mm
Specifications
Product type
Wide aluminium floor expansion joint with flexible insert
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 170 mm
Movement
Up to +25 / −15 mm
Sizes available
3 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.06?
The VEDA JDH 5.06 is a wide aluminium floor expansion joint with flexible insert. Seismic floor expansion joint, comprising aluminium side angle sections connected by an interchangeable flexible insert in the centre with plain surface, available in black or grey (other colours on request), able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
What joint gap widths does the JDH 5.06 cover?
It covers joint gaps up to 170 mm in 3 sizes: JDH 5.06-100 for gaps up to 100 mm, JDH 5.06-140 for gaps up to 140 mm and JDH 5.06-170 for gaps up to 170 mm.
How much movement can the JDH 5.06 accommodate?
Up to +25 / −15 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.06 made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDH 5.06 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.06 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.06 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.07
Reinforced floor expansion joint for wide openings
Floor joints with flexible insert
The VEDA JDH 5.07 is a reinforced floor expansion joint for wide openings. It covers joint gaps up to 180 mm, accommodates movement of ±10 to ±25 mm and is made of aluminium and EPDM.
The JDH 5.07 floor expansion joint is designed for openings up to 180 mm. Made of two aluminum side plates and a heat-weldable EPDM insert, this floor joint is perfect for all types of finishes: tile, marble, natural stone, resin, flexible flooring, etc. A corner version (floor/wall) is available with visible side plate.
Reinforced floor expansion joint
Special wide widths
For openings up to 180 mm
Sizes and movement
JDH 5.07 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.07-100
100 mm
+10 / −10 mm
110 mm
230 mm
60 / 80 / 100 mm
JDH 5.07-150
150 mm
+15 / −15 mm
160 mm
280 mm
60 / 80 / 100 mm
JDH 5.07-180
180 mm
+25 / −25 mm
190 mm
310 mm
60 / 80 / 100 mm
Specifications
Product type
Reinforced floor expansion joint for wide openings
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Aluminium, EPDM
Colour / finish
Black
Version
Flat and angle
Joint gap
Up to 180 mm
Movement
±10 to ±25 mm
Sizes available
3 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.07?
The VEDA JDH 5.07 is a reinforced floor expansion joint for wide openings. The JDH 5.07 floor expansion joint is designed for openings up to 180 mm. Made of two aluminum side plates and a heat-weldable EPDM insert, this floor joint is perfect for all types of finishes: tile, marble, natural stone, resin, flexible flooring, etc.
What joint gap widths does the JDH 5.07 cover?
It covers joint gaps up to 180 mm in 3 sizes: JDH 5.07-100 for gaps up to 100 mm, JDH 5.07-150 for gaps up to 150 mm and JDH 5.07-180 for gaps up to 180 mm.
How much movement can the JDH 5.07 accommodate?
Between ±10 and ±25 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.07 made of?
It is made of aluminium and EPDM. Colour and finish options: black. Version: flat and angle.
Is the JDH 5.07 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.07 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.07 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.08
Reinforced aluminium floor expansion joint for wide gaps
Floor joints with flexible insert
The VEDA JDH 5.08 is a reinforced aluminium floor expansion joint for wide gaps. It covers joint gaps up to 125 mm, accommodates movement of ±20 mm and is made of aluminium and nitrile.
Floor expansion joint for indoor and outdoor applications, comprising two aluminium side angle sections and one or two interchangeable flexible nitrile inserts available in black or grey, able to take up expansion and contraction movements.
The JDH 5.08 aluminium profile is part of Veda France’s range of floor expansion joints with flexible inserts.
Designed for interior and exterior use, the JDH 5.08 aluminum expansion joint is designed to be used for light vehicle traffic
It can be used uwith a wide variety of flooring options, including screed, concrete, natural stone, tile and more. The natural colours of the aluminium profile expansion floor joint ensure it blends into any design.
This product is designed with interchangeable flexible grooved inserts. The function of the expansion joints is the same as that of the joint covers; to close the expansion joint to make it aesthetically pleasing and to allow traffic on it.
Reinforced floor expansion joint
For wide gaps
For joint gaps up to 125 mm
Sizes and movement
JDH 5.08 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.08-125
125 mm
+20 / −20 mm
137 mm
268 mm
35 / 50 mm
Specifications
Product type
Reinforced aluminium floor expansion joint for wide gaps
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 125 mm
Movement
±20 mm
Sizes available
1 model
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Details
Product Specifications
The JDH 5.08 reinforced floor expansion joint is manufactured with two aluminum side plates and a grey or black nitrile insert. This high quality aluminum expansion joint is built to withstand light to medium traffic of cars.
The JDH 5.08 can be used for openings up to 125mm, making it ideal for large floor spacing.
The product specifications are:
Product type: Aluminium profile expansion floor joint with flexible inserts
Gap Cover: Up to 125mm
Movements: Up to + or – 20mm
Visible Width Of Product Sides: 137mm
Total Width: 268mm
Height: 35 or 50mm
Standard length: 3lm
Load Bearing Capacity: Light vehicles
Once the aluminum expansion joint has been installed and screwed, the floor convering can be installed.
What You Need To Know
The longevity and usability of the product depend on a variety of different factors that can affect your project. These factors include the installation quality, the material used and the environment that the aluminium expansion joint is kept in and others.
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced, and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200 x 200 mm. Other control joints are available for larger projects with higher specifications.
You can check our expansion joints section.
Frequently asked questions
What is the JDH 5.08?
The VEDA JDH 5.08 is a reinforced aluminium floor expansion joint for wide gaps. Floor expansion joint for indoor and outdoor applications, comprising two aluminium side angle sections and one or two interchangeable flexible nitrile inserts available in black or grey, able to take up expansion and contraction movements.
What joint gap widths does the JDH 5.08 cover?
It covers joint gaps up to 125 mm.
How much movement can the JDH 5.08 accommodate?
It accommodates ±20 mm of movement.
What is the JDH 5.08 made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDH 5.08 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.08 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.08 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.10
Brass floor expansion joint with flexible insert
Floor joints with flexible insert
The VEDA JDH 5.10 is a brass floor expansion joint with flexible insert. It covers joint gaps up to 30 mm, accommodates movement of +10 / −5 mm and is made of brass and nitrile.
Floor expansion joint for indoor and outdoor applications, comprising an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, marble, etc.
For indoor and outdoor floor joints with a gap up to 30 mm. Suitable for pedestrians and non-intense traffic of light vehicles.
Section length of 3 m
Brass side angle sections. Nitrile insert
Floor expansion joint with flexible insert
Brass expansion joint for luxurious finishes
Sizes and movement
JDH 5.10 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.10-030
30 mm
+10 / −5 mm
40 mm
115 mm
40 mm
Specifications
Product type
Brass floor expansion joint with flexible insert
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Brass, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 30 mm
Movement
+10 / −5 mm
Sizes available
1 model
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.10?
The VEDA JDH 5.10 is a brass floor expansion joint with flexible insert. Floor expansion joint for indoor and outdoor applications, comprising an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, marble, etc.
What joint gap widths does the JDH 5.10 cover?
It covers joint gaps up to 30 mm.
How much movement can the JDH 5.10 accommodate?
It accommodates +10 / −5 mm of movement.
What is the JDH 5.10 made of?
It is made of brass and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDH 5.10 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.10 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.10 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.18
Extra-wide aluminium floor expansion joint with nitrile inserts
Floor joints with flexible insert
The VEDA JDH 5.18 is an extra-wide aluminium floor expansion joint with nitrile inserts. It covers joint gaps up to 500 mm, accommodates movement of ±20 mm and is made of aluminium and nitrile.
Seismic floor expansion joint, extra large, comprising two identical sections, generally from the JDH 5.02 or JDH 5.04 (see data sheets), connected by an aluminium supporting structure. The inserts are available in black or gray and in different widths (50 mm, 65 mm), able to take up relatively significant tridimensional movements. The extra large joint is suitable for gaps up to 600 mm and for all types of finish: slabs, screed, tiling, stone, marble, carpet, etc.
For indoor and outdoor floor joints with a gap up to 600 mm. Suitable for intense traffic of pedestrians and light trolleys (airport, supermarkets…), and in the case the JDH 5.04, suitable also for intense traffic of light vehicles.
Section length of 3 lm. Nitrile inserts
Aluminium side angle sections, pre-drilled
Galvanised middle plate in different thicknesses according to the load and width of the expansion joint
Floor-to-floor type, and floor-to-wall type with exposed skirting. Black or gray inserts, plain (special hospital environment) available in nitrile. The plain option reduces the movement range.
Stainless steel or brass side caps available for a special finish
Wide floor expansion joint
Available insert: smooth
For joint gaps from 100 to 500 mm
Sizes and movement
JDH 5.18 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.18/060-100
100 mm
+20 / −20 mm
430 mm
530 mm
26 / 35 / 40 / 50 mm
JDH 5.18/060-150
150 mm
+20 / −20 mm
480 mm
580 mm
26 / 35 / 40 / 50 mm
JDH 5.18/060-200
200 mm
+20 / −20 mm
530 mm
630 mm
26 / 35 / 40 / 50 mm
JDH 5.18/060-250
250 mm
+20 / −20 mm
580 mm
680 mm
26 / 35 / 40 / 50 mm
JDH 5.18/060-300
300 mm
+20 / −20 mm
630 mm
730 mm
26 / 35 / 40 / 50 mm
JDH 5.18/060-350
350 mm
+20 / −20 mm
680 mm
780 mm
26 / 35 / 40 / 50 mm
JDH 5.18/060-400
400 mm
+20 / −20 mm
730 mm
830 mm
26 / 35 / 40 / 50 mm
JDH 5.18/060-450
450 mm
+20 / −20 mm
780 mm
880 mm
26 / 35 / 40 / 50 mm
JDH 5.18/060-500
500 mm
+20 / −20 mm
830 mm
930 mm
26 / 35 / 40 / 50 mm
Specifications
Product type
Extra-wide aluminium floor expansion joint with nitrile inserts
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 500 mm
Movement
±20 mm
Sizes available
9 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.18?
The VEDA JDH 5.18 is an extra-wide aluminium floor expansion joint with nitrile inserts. Seismic floor expansion joint, extra large, comprising two identical sections, generally from the JDH 5.02 or JDH 5.04 (see data sheets), connected by an aluminium supporting structure.
What joint gap widths does the JDH 5.18 cover?
It covers joint gaps up to 500 mm across 9 models, from JDH 5.18/060-100 to JDH 5.18/060-500. The size table lists the gap for each model.
How much movement can the JDH 5.18 accommodate?
It accommodates ±20 mm of movement.
What is the JDH 5.18 made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDH 5.18 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.18 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.18 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.190
Seismic aluminium floor expansion joint for large movements
Floor joints with flexible insert · Seismic joints
The VEDA JDH 5.190 is a seismic aluminium floor expansion joint for large movements. It covers joint gaps up to 500 mm, accommodates movement of ±25 to ±250 mm and is made of aluminium.
Seismic floor expansion joint suitable for all types of construction sites with pedestrian or light cart traffic. This model is available for initial openings from 50mm to 500mm. For larger openings, please consult us.
All-metal floor expansion joint
Special large movements: 50%
Opening up to 500 mm
Sizes and movement
JDH 5.190 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.190-050
50 mm
+25 / −25 mm
348 mm
407 mm
51 mm
JDH 5.190-080
80 mm
+40 / −40 mm
348 mm
407 mm
51 mm
JDH 5.190-100
100 mm
+50 / −50 mm
348 mm
407 mm
51 mm
JDH 5.190-150
150 mm
+75 / −75 mm
406 mm
465 mm
51 mm
JDH 5.190-200
200 mm
+100 / −100 mm
456 mm
515 mm
51 mm
JDH 5.190-250
250 mm
+125 / −125 mm
676 mm
726 mm
64 mm
JDH 5.190-300
300 mm
+150 / −150 mm
726 mm
776 mm
64 mm
JDH 5.190-350
350 mm
+175 / −175 mm
892 mm
943 mm
64 mm
JDH 5.190-400
400 mm
+200 / −200 mm
1026 mm
1076 mm
64 mm
JDH 5.190-450
450 mm
+225 / −225 mm
1087 mm
1138 mm
64 mm
JDH 5.190-500
500 mm
+250 / −250 mm
1226 mm
1276 mm
64 mm
Specifications
Product type
Seismic aluminium floor expansion joint for large movements
Category
Floor joints with flexible insert · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Installation
Embedded
Joint gap
Up to 500 mm
Movement
±25 to ±250 mm
Sizes available
11 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.190?
The VEDA JDH 5.190 is a seismic aluminium floor expansion joint for large movements. Seismic floor expansion joint suitable for all types of construction sites with pedestrian or light cart traffic. This model is available for initial openings from 50mm to 500mm.
What joint gap widths does the JDH 5.190 cover?
It covers joint gaps up to 500 mm across 11 models, from JDH 5.190-050 to JDH 5.190-500. The size table lists the gap for each model.
How much movement can the JDH 5.190 accommodate?
Between ±25 and ±250 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.190 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 5.190 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.190 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.190 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.211
Embedded aluminium seismic floor expansion joint with EPDM inserts
Floor joints with flexible insert · Seismic joints
The VEDA JDH 5.211 is an embedded aluminium seismic floor expansion joint with EPDM inserts. It covers joint gaps up to 250 mm, accommodates movement of ±25 to ±125 mm and is made of aluminium and nitrile.
The JDH 5.211 floor expansion joint has been added to our range of floor joints this year. Composed of aluminium side plates and a center section and two interchangeable flexible EPDM inserts, this profile is suitable for light pedestrian and carts. This product is also available as an angle (floor/wall) with a visible or invisible side plates to the wall for a perfect finish.
Seismic floor expansion joint
Embedded floor joint
Expansion joint for openings up to 250 mm
Sizes and movement
JDH 5.211 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.211-050
50 mm
+25 / −25 mm
205 mm
205 mm
20 mm
JDH 5.211-075
75 mm
+37.5 / −37.5 mm
252 mm
252 mm
20 mm
JDH 5.211-100
100 mm
+50 / −50 mm
252 mm
252 mm
20 mm
JDH 5.211-125
125 mm
+62.5 / −62.5 mm
328 mm
328 mm
20 mm
JDH 5.211-150
150 mm
+75 / −75 mm
328 mm
328 mm
20 mm
JDH 5.211-175
175 mm
+87.5 / −87.5 mm
381 mm
381 mm
20 mm
JDH 5.211-200
200 mm
+100 / −100 mm
406 mm
406 mm
20 mm
JDH 5.211-250
250 mm
+125 / −125 mm
584 mm
584 mm
20 mm
Specifications
Product type
Embedded aluminium seismic floor expansion joint with EPDM inserts
Category
Floor joints with flexible insert · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Natural
Version
Flat and angle
Installation
Embedded
Joint gap
Up to 250 mm
Movement
±25 to ±125 mm
Sizes available
8 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load-bearing capacity is based on the initial position of the joint. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200mm.
Frequently asked questions
What is the JDH 5.211?
The VEDA JDH 5.211 is an embedded aluminium seismic floor expansion joint with EPDM inserts. The JDH 5.211 floor expansion joint has been added to our range of floor joints this year. Composed of aluminium side plates and a center section and two interchangeable flexible EPDM inserts, this profile is suitable for light pedestrian and carts.
What joint gap widths does the JDH 5.211 cover?
It covers joint gaps up to 250 mm across 8 models, from JDH 5.211-050 to JDH 5.211-250. The size table lists the gap for each model.
How much movement can the JDH 5.211 accommodate?
Between ±25 and ±125 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.211 made of?
It is made of aluminium and nitrile. Colour and finish options: natural. Version: flat and angle.
Is the JDH 5.211 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.211 defined?
The load-bearing capacity is based on the initial position of the joint. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.211 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.25
Watertight floor expansion joint for car parks
Floor joints with flexible insert · Car park joints
The VEDA JDH 5.25 is a watertight floor expansion joint for car parks. It covers joint gaps up to 110 mm, accommodates movement of ±25 to ±50 mm and is made of aluminium, stainless steel and nitrile.
Watertight floor expansion joint specially recommended for carparks. Stainless steel or aluminium protection, very good protection, very good resistance to intensive light vehicles traffic. Very resistant to chemicals and petrol.
Specially designed for multistorey and underground exterior and interior carparks, ramps, podium, pedestrian bridges, etc.
Weldable insert. Available with short or long wings
Expansion joint 100% watertight, especially suitable for car roof
Stainless steel or aluminium protection
Sizes and movement
JDH 5.25 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.25-060
60 mm
+25 / −25 mm
123 mm
280 mm
30 / 40 / 50 / 80 mm
JDH 5.25-110
110 mm
+50 / −50 mm
173 mm
330 mm
40 / 50 / 80 mm
JDH 5.25-060 A
60 mm
+25 / −25 mm
87 mm
167 mm
30 / 40 / 50 / 80 mm
JDH 5.25-110 A
110 mm
+50 / −50 mm
137 mm
217 mm
40 / 50 / 80 mm
Specifications
Product type
Watertight floor expansion joint for car parks
Category
Floor joints with flexible insert · Car park joints
Brand
VEDA (VEDA France)
Material
Aluminium, stainless steel, nitrile
Colour / finish
Black
Version
Flat and angle
Joint gap
Up to 110 mm
Movement
±25 to ±50 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.25?
The VEDA JDH 5.25 is a watertight floor expansion joint for car parks. Stainless steel or aluminium protection, very good protection, very good resistance to intensive light vehicles traffic. Very resistant to chemicals and petrol.
What joint gap widths does the JDH 5.25 cover?
It covers joint gaps up to 110 mm in 4 sizes: JDH 5.25-060 for gaps up to 60 mm, JDH 5.25-110 for gaps up to 110 mm, JDH 5.25-060 A for gaps up to 60 mm and JDH 5.25-110 A for gaps up to 110 mm.
How much movement can the JDH 5.25 accommodate?
Between ±25 and ±50 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.25 made of?
It is made of aluminium, stainless steel and nitrile. Colour and finish options: black. Version: flat and angle.
Is the JDH 5.25 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.25 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.25 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.26 R+3
Surface-mounted floor expansion joint for resilient flooring or resin finishes
Floor joints with flexible insert
The VEDA JDH 5.26 R+3 is a surface-mounted floor expansion joint for resilient flooring or resin finishes. It covers joint gaps up to 60 mm, accommodates movement of ±3 to ±10 mm and is made of aluminium and nitrile.
Surface mounted floor expansion joint profile for interior or exterior. Made of drilled and coutersunk reinforced aluminium side plates associated with a hot weldable flexible insert.
Specially adapted for resilient flooring or resin finishes.
Sizes and movement
JDH 5.26 R+3 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
JDH 5.26 R+3-020
20 mm
+3 / −3 mm
140 mm
140 mm
JDH 5.26 R+3-030
30 mm
+7 / −7 mm
150 mm
150 mm
JDH 5.26 R+3-040
40 mm
+10 / −10 mm
160 mm
160 mm
JDH 5.26 R+3-050
50 mm
+7 / −7 mm
180 mm
180 mm
JDH 5.26 R+3-060
60 mm
+10 / −10 mm
195 mm
195 mm
Specifications
Product type
Surface-mounted floor expansion joint for resilient flooring or resin finishes
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 60 mm
Movement
±3 to ±10 mm
Sizes available
5 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.26 R+3?
The VEDA JDH 5.26 R+3 is a surface-mounted floor expansion joint for resilient flooring or resin finishes. Made of drilled and coutersunk reinforced aluminium side plates associated with a hot weldable flexible insert. Specially adapted for resilient flooring or resin finishes.
What joint gap widths does the JDH 5.26 R+3 cover?
It covers joint gaps up to 60 mm in 5 sizes: JDH 5.26 R+3-020 for gaps up to 20 mm, JDH 5.26 R+3-030 for gaps up to 30 mm, JDH 5.26 R+3-040 for gaps up to 40 mm, JDH 5.26 R+3-050 for gaps up to 50 mm and JDH 5.26 R+3-060 for gaps up to 60 mm.
How much movement can the JDH 5.26 R+3 accommodate?
Between ±3 and ±10 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.26 R+3 made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDH 5.26 R+3 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.26 R+3 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.26 R+3 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.26
Surface-mounted floor expansion joint for finished floors
Floor joints with flexible insert
The VEDA JDH 5.26 is a surface-mounted floor expansion joint for finished floors. It covers joint gaps up to 60 mm, accommodates movement of ±3 to ±10 mm and is made of aluminium and nitrile.
Surface mounted floor expansion joint profile for interior or exterior. Made of drilled and coutersunk reinforced aluminium side plates associated with a hot weldable flexible insert.
Specially adapted for installation on finished floor.
Surface mounted floor expansion joint
For joint gaps from 20 to 60 mm
Sizes and movement
JDH 5.26 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
JDH 5.26-020
20 mm
+3 / −3 mm
140 mm
140 mm
JDH 5.26-030
30 mm
+7 / −7 mm
150 mm
150 mm
JDH 5.26-040
40 mm
+10 / −10 mm
160 mm
160 mm
JDH 5.26-050
50 mm
+7 / −7 mm
180 mm
180 mm
JDH 5.26-060
60 mm
10 / −10 mm
195 mm
195 mm
Specifications
Product type
Surface-mounted floor expansion joint for finished floors
Category
Floor joints with flexible insert
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 60 mm
Movement
±3 to ±10 mm
Sizes available
5 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.26?
The VEDA JDH 5.26 is a surface-mounted floor expansion joint for finished floors. Made of drilled and coutersunk reinforced aluminium side plates associated with a hot weldable flexible insert. Specially adapted for installation on finished floor.
What joint gap widths does the JDH 5.26 cover?
It covers joint gaps up to 60 mm in 5 sizes: JDH 5.26-020 for gaps up to 20 mm, JDH 5.26-030 for gaps up to 30 mm, JDH 5.26-040 for gaps up to 40 mm, JDH 5.26-050 for gaps up to 50 mm and JDH 5.26-060 for gaps up to 60 mm.
How much movement can the JDH 5.26 accommodate?
Between ±3 and ±10 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.26 made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDH 5.26 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.26 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.26 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.30
Floor expansion joint for interior car park levels
Floor joints with flexible insert · Car park joints
The VEDA JDH 5.30 is a floor expansion joint for interior car park levels. It covers joint gaps up to 25 mm, accommodates movement of up to +35 / −10 mm and is made of aluminium, steel and nitrile.
Floor expansion joint for interior carparks levels and any other applications without traffic or with traffic of low speed vehicles. Made of flexible insert able to take up expansion and contraction movements. The JDH 5.30 expansion joint is held by two galvanised steel, aluminium or stainless steel side plates in different thicknesses.
For indoor floor joints with a gap between 20 mm and 25 mm. Suitable for intense traffic of light vehicles.
Pre-drilled side strips of 3m length. Made of galvanised steel or stainless steel or mill finish aluminium according to requirements and a nitrile insert. Rolls of 21m.
Floor-to-floor type, can also be installed as floor-to-wall type with exposed skirting
Black or grey insert
Floor expansion joint
For interior carparks levels
For joint gaps from 20 to 25 mm
Sizes and movement
JDH 5.30 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
JDH 5.30
20 – 25 mm
+35 / 10 mm
150 mm
150 mm
JDH 5.30 A
20 – 25 mm
+35 / 10 mm
90 mm
90 mm
Specifications
Product type
Floor expansion joint for interior car park levels
Category
Floor joints with flexible insert · Car park joints
Brand
VEDA (VEDA France)
Material
Aluminium, steel, nitrile
Colour / finish
Black, grey
Version
Flat and angle
Joint gap
Up to 25 mm
Movement
Up to +35 / −10 mm
Sizes available
2 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.30?
The VEDA JDH 5.30 is a floor expansion joint for interior car park levels. Floor expansion joint for interior carparks levels and any other applications without traffic or with traffic of low speed vehicles. Made of flexible insert able to take up expansion and contraction movements.
What joint gap widths does the JDH 5.30 cover?
It covers joint gaps up to 25 mm in 2 sizes: JDH 5.30 for gaps of 20 – 25 mm and JDH 5.30 A for gaps of 20 – 25 mm.
How much movement can the JDH 5.30 accommodate?
Up to +35 / −10 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.30 made of?
It is made of aluminium, steel and nitrile. Colour and finish options: black and grey. Version: flat and angle.
Is the JDH 5.30 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.30 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.30 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.305
Floor expansion joint for car parks with finished floors
Floor joints with flexible insert · Car park joints
The VEDA JDH 5.305 is a floor expansion joint for car parks with finished floors. It covers joint gaps up to 30 mm, accommodates movement of ±15 mm and is made of aluminium, steel and nitrile.
Made of flexible insert, able to take up expansion and contraction movements and two galvanised steel, mill finish aluminium or stainless steel strips. For indoor floor joints with a gap between 25 mm and 30 mm. Suitable for light vehicles.
Side plates of 3m lengths and nitrile insert, roll length of 21m.
Movement capacities from +15 to -15
Floor-to-floor type, can also be installed as floor-to-wall type with exposed skirting
Our expansion joint is compatible with our passive fire barrier and waterproofing membrane
Floor expansion joint
Special finished floor
For joint gaps from 25 to 30 mm
Sizes and movement
JDH 5.305 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
JDH 5.305
25 – 30 mm
+15 / −15 mm
160 mm
160 mm
JDH 5.305 A
25 – 30 mm
+15 / −15 mm
100 mm
100 mm
Specifications
Product type
Floor expansion joint for car parks with finished floors
Category
Floor joints with flexible insert · Car park joints
Brand
VEDA (VEDA France)
Material
Aluminium, steel, nitrile
Colour / finish
Black, grey
Joint gap
Up to 30 mm
Movement
±15 mm
Sizes available
2 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.305?
The VEDA JDH 5.305 is a floor expansion joint for car parks with finished floors. Made of flexible insert, able to take up expansion and contraction movements and two galvanised steel, mill finish aluminium or stainless steel strips. For indoor floor joints with a gap between 25 mm and 30 mm.
What joint gap widths does the JDH 5.305 cover?
It covers joint gaps up to 30 mm in 2 sizes: JDH 5.305 for gaps of 25 – 30 mm and JDH 5.305 A for gaps of 25 – 30 mm.
How much movement can the JDH 5.305 accommodate?
It accommodates ±15 mm of movement.
What is the JDH 5.305 made of?
It is made of aluminium, steel and nitrile. Colour and finish options: black and grey.
Is the JDH 5.305 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.305 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.305 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.31
Floor expansion joint for car parks and access ramps
Floor joints with flexible insert · Car park joints
The VEDA JDH 5.31 is a floor expansion joint for car parks and access ramps. It covers joint gaps up to 50 mm, accommodates movement of ±20 mm and is made of aluminium, steel and nitrile.
Floor expansion joint for interior carparks, access ramps, and any other applications without traffic or with traffic of low speed vehicles. The JDH 5.305 surface mounted profile is made of flexible section and two galvanised steel, aluminium or stainless steel side plates. Perfectly suited for finished floor.
For indoor floor joints with a gap of 45 to 50mm.
Floor-to-floor type, can also be installed as floor-to-wall type with exposed skirting
Floor expansion joint
Designed for car parks, access ramps
For joint gaps of 45 to 50 mm
Sizes and movement
JDH 5.31 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
JDH 5.31
45 – 50 mm
−20 / +20 mm
180 mm
180 mm
JDH 5.31 A
45 – 50 mm
−20 / +20 mm
117 mm
117 mm
Specifications
Product type
Floor expansion joint for car parks and access ramps
Category
Floor joints with flexible insert · Car park joints
Brand
VEDA (VEDA France)
Material
Aluminium, steel, nitrile
Colour / finish
Black, grey
Version
Flat and angle
Joint gap
Up to 50 mm
Movement
±20 mm
Sizes available
2 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Details
Recommendation
We recommend to glue the wings of the insert.
Hot-welding recommended for junction of the flexible insert (accessories upon request).
Fixings: please contact us for technical recommendation.
Frequently asked questions
What is the JDH 5.31?
The VEDA JDH 5.31 is a floor expansion joint for car parks and access ramps. Floor expansion joint for interior carparks, access ramps, and any other applications without traffic or with traffic of low speed vehicles. The JDH 5.305 surface mounted profile is made of flexible section and two galvanised steel, aluminium or stainless steel side plates.
What joint gap widths does the JDH 5.31 cover?
It covers joint gaps up to 50 mm in 2 sizes: JDH 5.31 for gaps of 45 – 50 mm and JDH 5.31 A for gaps of 45 – 50 mm.
How much movement can the JDH 5.31 accommodate?
It accommodates ±20 mm of movement.
What is the JDH 5.31 made of?
It is made of aluminium, steel and nitrile. Colour and finish options: black and grey. Version: flat and angle.
Is the JDH 5.31 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.31 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.31 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.32
Floor expansion joint for interior car park levels
Floor joints with flexible insert · Car park joints
The VEDA JDH 5.32 is a floor expansion joint for interior car park levels. It covers joint gaps up to 60 mm, accommodates movement of up to +45 / −20 mm and is made of aluminium, steel and nitrile.
Floor expansion joint for interior car parks levels, access ramps, and any other place with or without traffic of slow vehicles. Made of flexible insert and mill finish aluminium or galvanized steel or stainless steel side plates, special finished floor.
For indoor floor joints with a gap between 50 mm and 60 mm. Suitable for intense traffic of light vehicles.
Pre-drilled side strips, 3 m length, galvanised steel or stainless steel. Nitrile insert, roll length of 15 m
Floor-to-floor type and floor-to-wall type with exposed skirting
Black or grey insert. Galvanised steel or stainless steel or mill finish aluminium side strips according to requirements
Floor expansion joint
For interior carparks levels
For joint gaps from 50 to 60 mm
Sizes and movement
JDH 5.32 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
JDH 5.32
50 – 60 mm
+45 / −20 mm
230 mm
230 mm
JDH 5.32 A
50 – 60 mm
+45 / −20 mm
145 or 140 mm
145 or 140 mm
Specifications
Product type
Floor expansion joint for interior car park levels
Category
Floor joints with flexible insert · Car park joints
Brand
VEDA (VEDA France)
Material
Aluminium, steel, nitrile
Colour / finish
Black, grey
Version
Flat and angle
Joint gap
Up to 60 mm
Movement
Up to +45 / −20 mm
Sizes available
2 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.32?
The VEDA JDH 5.32 is a floor expansion joint for interior car park levels. Floor expansion joint for interior car parks levels, access ramps, and any other place with or without traffic of slow vehicles. Made of flexible insert and mill finish aluminium or galvanized steel or stainless steel side plates, special finished floor.
What joint gap widths does the JDH 5.32 cover?
It covers joint gaps up to 60 mm in 2 sizes: JDH 5.32 for gaps of 50 – 60 mm and JDH 5.32 A for gaps of 50 – 60 mm.
How much movement can the JDH 5.32 accommodate?
Up to +45 / −20 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.32 made of?
It is made of aluminium, steel and nitrile. Colour and finish options: black and grey. Version: flat and angle.
Is the JDH 5.32 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.32 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.32 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 5.34
Aluminium floor expansion joint with flexible nitrile insert
Floor joints with flexible insert · Car park joints
The VEDA JDH 5.34 is an aluminium floor expansion joint with flexible nitrile insert. It covers joint gaps up to 150 mm, accommodates movement of ±7.5 to ±12.5 mm and is made of aluminium and nitrile.
Mechanical floor expansion joint made of aluminium side plates and flexible insert for all types of finishes : screed, natural stone, cast stone, etc.
Floor expansion joint
Designed for all types of finishes, natural stone, cast stone
For joint gaps from 100 to 150 mm
Sizes and movement
JDH 5.34 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 5.34-100
100 mm
+7.5 / −7.5 mm
250 mm
250 mm
35 mm
JDH 5.34-150
150 mm
+12.5 / −12.5 mm
345 mm
345 mm
50 mm
Specifications
Product type
Aluminium floor expansion joint with flexible nitrile insert
Category
Floor joints with flexible insert · Car park joints
Brand
VEDA (VEDA France)
Material
Aluminium, nitrile
Colour / finish
Black, grey, RAL colours
Version
Flat and angle
Joint gap
Up to 150 mm
Movement
±7.5 to ±12.5 mm
Sizes available
2 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 5.34?
The VEDA JDH 5.34 is an aluminium floor expansion joint with flexible nitrile insert. Mechanical floor expansion joint made of aluminium side plates and flexible insert for all types of finishes : screed, natural stone, cast stone, etc.
What joint gap widths does the JDH 5.34 cover?
It covers joint gaps up to 150 mm in 2 sizes: JDH 5.34-100 for gaps up to 100 mm and JDH 5.34-150 for gaps up to 150 mm.
How much movement can the JDH 5.34 accommodate?
Between ±7.5 and ±12.5 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 5.34 made of?
It is made of aluminium and nitrile. Colour and finish options: black, grey and RAL colours. Version: flat and angle.
Is the JDH 5.34 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 5.34 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 5.34 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.04
Stainless steel floor expansion joint for intensive heavy-duty traffic
All metal floor joints
The VEDA JDH 6.04 is an all-metal floor expansion joint for intensive heavy-duty traffic. It bridges joint gaps of up to 250 mm, carries axle loads of up to 19 tonnes, and is suitable for indoor and outdoor floors.
The JDH 6.04 is designed to withstand extremely heavy loads such as load handling equipment and lorries. Its comb-shaped top cover plate and central support plate are supplied in hardened steel or stainless steel, depending on the strength required and the working environment.
It can be used with all types of floor finish, including concrete, screed and tiles.
For intensive heavy-duty traffic
For joint gaps up to 250 mm, in four sizes
Suitable for all types of finish: concrete, screed, tiles
Indoor and outdoor use
Compatible with VEDA fire protection solutions and waterproofing membranes
Sizes and movement
JDH 6.04 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.04-040
0 – 40 mm
+15 / −15 mm
185 mm
185 mm
26 mm
JDH 6.04-100
40 – 100 mm
+20 / −20 mm
300 mm
300 mm
28 mm
JDH 6.04-200
100 – 200 mm
+20 / −20 mm
370 mm
370 mm
28 mm
JDH 6.04-250
200 – 250 mm
+20 / −20 mm
420 mm
420 mm
28 mm
Length on request.
Specifications
Product type
All-metal mechanical floor expansion joint
Material
Steel (hardened) or stainless steel
Colour
Natural
Version
Flat only
Environment
Indoor and outdoor
Floor finishes
Concrete, screed, tiles
Maximum load
Up to 19 tonnes per axle
Suitable traffic
Fork-lift trucks on solid tyres (Vulkollan), HGVs, pallet trucks and other vehicles on pneumatic tyres
Length
On request
Compatibility
VEDA fire protection solutions and waterproofing membranes
Central support options. The standard joint has a section with a central flange for alignment. The STF60-L type has a stainless steel central support, with a more limited gap width and movement range.
Load-bearing capacity. Load capacity is given for the joint in its initial position. When the joint opens, capacity is strongly reduced and the product is only suitable for light pedestrian traffic. Stated loads are based on vehicles with pneumatic wheels and a 200 × 200 mm contact area.
Installation. Correct mounting of this product is essential. Ask us for the relevant technical instructions before installation.
Applications
The JDH 6.04 suits floors that carry heavy vehicles and handling equipment, such as:
Industrial floors
Stations
Airports
Shopping centres
Frequently asked questions
What is the JDH 6.04 expansion joint?
The JDH 6.04 is an all-metal floor expansion joint from VEDA, designed to withstand extremely heavy loads such as load handling equipment and lorries. Its comb-shaped top cover plate and central support plate are supplied in hardened steel or stainless steel.
What joint gap widths does the JDH 6.04 cover?
It covers joint gaps up to 250 mm in four sizes: 6.04-040 for 0–40 mm, 6.04-100 for 40–100 mm, 6.04-200 for 100–200 mm and 6.04-250 for 200–250 mm.
How much movement can the JDH 6.04 accommodate?
The 6.04-040 accommodates +15 / −15 mm of movement. The 6.04-100, 6.04-200 and 6.04-250 accommodate +20 / −20 mm.
What loads can the JDH 6.04 carry?
It is suitable for heavy loads of up to 19 tonnes per axle, including fork-lift trucks on solid tyres (Vulkollan), HGVs, pallet trucks and other vehicles on pneumatic tyres. Load capacity applies to the joint in its initial position and is strongly reduced when the joint opens.
Can the JDH 6.04 be used outdoors?
Yes. It is suitable for both indoor and outdoor floor joints.
Which floor finishes is the JDH 6.04 suitable for?
All types of finish, including concrete, screed and tiles.
Is the JDH 6.04 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
What lengths is the JDH 6.04 supplied in?
Length is on request.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.04 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.05
Stainless steel floor expansion joint for heavy loads and intensive traffic
All metal floor joints
The VEDA JDH 6.05 is a stainless steel floor expansion joint for heavy loads and intensive traffic. It covers joint gaps up to 70 mm, accommodates movement of ±15 to ±20 mm and is made of steel and stainless steel.
All-metal floor expansion joint specially designed to withstand extremely heavy loads: load handling equipment, lorries... Suitable for indoor and outdoor applications. The top cover plate with the comb shape and the central support plate can be supplied in hardened steel or in stainless steel, depending on the strength required and the working environment.
Suitable for all types of applications: industrial floors, station, airports, shopping centres…
For indoor and outdoor floor joints with a gap up to 70 mm. Suitable for heavy loads of up to 19 tonnes/axle and traffic of fork-lift truck on solid tyres (Vulkollan), HGV, pallet trucks and other vehicles on pneumatic tyres.
Length on request
Available in hardened steel or stainless steel. The standard joint has a section with a central flange for alignment; the STF60-L type has a stainless steel central support, with a more limited gap width and movement range. The mounting of this product is is essential; please enquire regarding about the relevant technical instructions.
Special heavy loads and intensive traffic
Coverings: concrete, screed, tiles
For joint gaps up to 70 mm
Sizes and movement
JDH 6.05 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.05-050
0 – 50 mm
+15 / −15 mm
185 mm
185 mm
19 mm
JDH 6.05-070
50 – 70 mm
+20 / −20 mm
260 mm
260 mm
20 mm
Specifications
Product type
Stainless steel floor expansion joint for heavy loads and intensive traffic
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Steel, stainless steel
Colour / finish
Natural
Version
Flat only
Joint gap
Up to 70 mm
Movement
±15 to ±20 mm
Sizes available
2 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.05?
The VEDA JDH 6.05 is a stainless steel floor expansion joint for heavy loads and intensive traffic. All-metal floor expansion joint specially designed to withstand extremely heavy loads: load handling equipment, lorries... Suitable for indoor and outdoor applications.
What joint gap widths does the JDH 6.05 cover?
It covers joint gaps up to 70 mm in 2 sizes: JDH 6.05-050 for gaps of 0 – 50 mm and JDH 6.05-070 for gaps of 50 – 70 mm.
How much movement can the JDH 6.05 accommodate?
Between ±15 and ±20 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.05 made of?
It is made of steel and stainless steel. Colour and finish options: natural. Version: flat only.
Is the JDH 6.05 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.05 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.05 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.06
Aluminium floor expansion joint for intensive heavy-duty traffic
All metal floor joints
The VEDA JDH 6.06 is an aluminium floor expansion joint for intensive heavy-duty traffic. It covers joint gaps up to 20 mm, accommodates movement of ±3 mm and is made of aluminium.
Floor expansion joint for indoor and outdoor applications, comprising two side angle sections and a central element made of aluminium, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints with a gap up to 20 mm. Suitable for heavy traffic of fork-lift truck on pneumatic tyres, lorries, pallet trucks and intense traffic of light vehicles.
Section length of 4 m
Aluminium side angle sections, pre-drilled
Floor-to-floor type
Anti-slip ribbed surface
This product is supplied ready to install, with spacers that must be removed after installation on the floor
Special parts on demand (T, X, L…)
For intensive heavy-duty traffic
All types of finishes: concrete, screed, tiles
For joint gaps of 20 mm
Sizes and movement
JDH 6.06 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.06
20 mm
3 / −3 mm
30 mm
127 mm
20 / 50 mm
Specifications
Product type
Aluminium floor expansion joint for intensive heavy-duty traffic
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 20 mm
Movement
±3 mm
Sizes available
1 model
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.06?
The VEDA JDH 6.06 is an aluminium floor expansion joint for intensive heavy-duty traffic. Floor expansion joint for indoor and outdoor applications, comprising two side angle sections and a central element made of aluminium, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
What joint gap widths does the JDH 6.06 cover?
It covers joint gaps up to 20 mm.
How much movement can the JDH 6.06 accommodate?
It accommodates ±3 mm of movement.
What is the JDH 6.06 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.06 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.06 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.06 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.08
All-aluminium seismic floor expansion joint
All metal floor joints
The VEDA JDH 6.08 is an all-aluminium seismic floor expansion joint. It covers joint gaps up to 110 mm, accommodates movement of ±5 to ±30 mm and is made of aluminium.
All aluminium seismic floor expansion joint for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints with a gap up to 100 mm. Suitable for heavy traffic of fork-lift truck on pneumatic tyres, pallet trucks and intense traffic of light vehicles.
Section length of 4 m. Nitrile vapour barrier
Aluminium side angle sections, pre-drilled
Floor-to-floor type, and floor-to-wall type with exposed skirting. Vapour membrane as option (for heights > 20 mm), which can be supplied as whole length to avoid joining on site.
Surface finish: anti-slip ribbed or plain. Special finish with anti-slip nitrile inserts on request (426/RS range)
Special parts on demand (T, X, L…)
Seismic expansion joint
For intensive heavy-duty traffic
For joint gaps from 30 to 110 mm
Sizes and movement
JDH 6.08 sizes: joint gap, movement and dimensions
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.08?
The VEDA JDH 6.08 is an all-aluminium seismic floor expansion joint. All aluminium seismic floor expansion joint for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction.
What joint gap widths does the JDH 6.08 cover?
It covers joint gaps up to 110 mm in 5 sizes: JDH 6.08-030 for gaps up to 30 mm, JDH 6.08-050 for gaps up to 50 mm, JDH 6.08-070 for gaps up to 70 mm, JDH 6.08-090 for gaps up to 90 mm and JDH 6.08-110 for gaps up to 110 mm.
How much movement can the JDH 6.08 accommodate?
Between ±5 and ±30 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.08 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.08 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.08 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.08 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.11
Embedded aluminium floor expansion joint for adhesive tiles
All metal floor joints
The VEDA JDH 6.11 is an embedded aluminium floor expansion joint for adhesive tiles. It covers joint gaps up to 40 mm, accommodates movement of ±6 mm and is made of aluminium.
VEDA FRANCE has designed an embedded floor expansion joint for limited heights for tiles, natural stone and adhesive ceramic.
Made of 2 aluminum side plates, the JDH 6.11 allows expansion and contraction movements as well as vertical and shear movements.
It is suitable for shopping centres, hospitals, hotels, schools, etc
Thanks to its limited visual impact, the JDH 6.11 meets the most demanding architectural aesthetic requirements
Smooth finish
Sizes and movement
JDH 6.11 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.11-040
40 mm
+6 / −6 mm
55 mm
133 mm
12 mm
Specifications
Product type
Embedded aluminium floor expansion joint for adhesive tiles
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat
Joint gap
Up to 40 mm
Movement
±6 mm
Sizes available
1 model
Compatibility
VEDA fire protection solutions and waterproofing membranes
Frequently asked questions
What is the JDH 6.11?
The VEDA JDH 6.11 is an embedded aluminium floor expansion joint for adhesive tiles. VEDA FRANCE has designed an embedded floor expansion joint for limited heights for tiles, natural stone and adhesive ceramic. Made of 2 aluminum side plates, the JDH 6.11 allows expansion and contraction movements as well as vertical and shear movements.
What joint gap widths does the JDH 6.11 cover?
It covers joint gaps up to 40 mm.
How much movement can the JDH 6.11 accommodate?
It accommodates ±6 mm of movement.
What is the JDH 6.11 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat.
Is the JDH 6.11 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.11 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.12
All-metal aluminium floor expansion joint for intensive heavy-duty traffic
All metal floor joints
The VEDA JDH 6.12 is an all-metal aluminium floor expansion joint for intensive heavy-duty traffic. It covers joint gaps up to 110 mm, accommodates movement of ±8 to ±25 mm and is made of aluminium.
All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries... Suitable for indoor and outdoor applications. The central elements allow significant expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements and heavy loads. Suitable for heavy traffic of fork-lift truck on solid tyres (Vulkollan), loads of up to 6 tonnes/axle on pneumatic tyres, lorries, pallet trucks and intense traffic of light vehicles.
Section length of 3 m. Aluminium side angle sections, pre-drilled
Floor-to-floor and floor-to-wall types. Anti-slip ribbed surface. This product is supplied ready to install, with spacers that must be removed after installation on the floor.
For intensive heavy-duty traffic
For joint gaps from 60 to 110 mm
Sizes and movement
JDH 6.12 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.12-040
40 mm
+8 / −8 mm
65 mm
190 mm
20 / 35 / 50 / 80 / 100 mm
JDH 6.12-060
60 mm
+15 / −15 mm
90 mm
215 mm
20 / 35 / 50 / 80 / 100 mm
JDH 6.12-080
80 mm
+20 / −20 mm
105 mm
230 mm
20 / 35 / 50 / 80 / 100 mm
JDH 6.12-110
110 mm
+25 / −25 mm
135 mm
260 mm
20 / 35 / 50 / 80 / 100 mm
Specifications
Product type
All-metal aluminium floor expansion joint for intensive heavy-duty traffic
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 110 mm
Movement
±8 to ±25 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.12?
The VEDA JDH 6.12 is an all-metal aluminium floor expansion joint for intensive heavy-duty traffic. All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries... Suitable for indoor and outdoor applications.
What joint gap widths does the JDH 6.12 cover?
It covers joint gaps up to 110 mm in 4 sizes: JDH 6.12-040 for gaps up to 40 mm, JDH 6.12-060 for gaps up to 60 mm, JDH 6.12-080 for gaps up to 80 mm and JDH 6.12-110 for gaps up to 110 mm.
How much movement can the JDH 6.12 accommodate?
Between ±8 and ±25 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.12 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.12 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.12 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.12 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.13
All-aluminium floor expansion joint for heavy loads
All metal floor joints
The VEDA JDH 6.13 is an all-aluminium floor expansion joint for heavy loads. It covers joint gaps up to 200 mm, accommodates movement of ±20 to ±40 mm and is made of aluminium.
The JDH 6.13 all-metal floor expansion joint is composed of two recessed aluminium side plates and two jaws. It is suitable for both indoor and outdoor use and for all types of finishes: tile, marble, natural stone, etc.
The JDH 6.13 profile complements the JDH 6.12 series with larger openings.
Special heavy loads and intensive use
For opening gaps up to 200 mm
Sizes and movement
JDH 6.13 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.13-125
125 mm
+20 / −20 mm
157 mm
265 mm
50 mm
JDH 6.13-150
150 mm
+25 / −25 mm
210 mm
345 mm
50 mm
JDH 6.13-175
175 mm
+40 / −40 mm
225 mm
354 mm
50 mm
JDH 6.13-200
200 mm
+40 / −40 mm
240 mm
402 mm
50 mm
Specifications
Product type
All-aluminium floor expansion joint for heavy loads
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
±20 to ±40 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.13?
The VEDA JDH 6.13 is an all-aluminium floor expansion joint for heavy loads. The JDH 6.13 all-metal floor expansion joint is composed of two recessed aluminium side plates and two jaws. It is suitable for both indoor and outdoor use and for all types of finishes: tile, marble, natural stone, etc.
What joint gap widths does the JDH 6.13 cover?
It covers joint gaps up to 200 mm in 4 sizes: JDH 6.13-125 for gaps up to 125 mm, JDH 6.13-150 for gaps up to 150 mm, JDH 6.13-175 for gaps up to 175 mm and JDH 6.13-200 for gaps up to 200 mm.
How much movement can the JDH 6.13 accommodate?
Between ±20 and ±40 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.13 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.13 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.13 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.13 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.14
All-metal floor expansion joint for heavy loads
All metal floor joints
The VEDA JDH 6.14 is an all-metal floor expansion joint for heavy loads. It covers joint gaps up to 200 mm, accommodates movement of ±30 mm and is made of aluminium.
All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries... Suitable for indoor and outdoor applications. The central elements allow significant expansion and contraction movements, as well as vertical shearing movements.
Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements and heavy loads. Suitable for heavy traffic of fork-lift truck on solid tyres (Vulkollan), loads of up to 6 tonnes/axle on pneumatic tyres, lorries, pallet trucks and intense traffic of light vehicles.
Section length of 3 m
Aluminium side angle sections, pre-drilled
Floor-to-floor and floor-to-wall types
Anti-slip ribbed surface
This product is supplied ready to install, with spacers that must be removed after installation on the floor
Reinforced seismic expansion joint
For intensive heavy-duty traffic
For joint gaps from 50 to 200 mm
Sizes and movement
JDH 6.14 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.14-050
50 mm
+30 / −30 mm
260 mm
260 mm
20 mm
JDH 6.14-100
100 mm
+30 / −30 mm
310 mm
310 mm
20 mm
JDH 6.14-150
150 mm
+30 / −30 mm
360 mm
360 mm
20 mm
JDH 6.14-200
200 mm
+30 / −30 mm
410 mm
410 mm
20 mm
Specifications
Product type
All-metal floor expansion joint for heavy loads
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
±30 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.14?
The VEDA JDH 6.14 is an all-metal floor expansion joint for heavy loads. All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries... Suitable for indoor and outdoor applications.
What joint gap widths does the JDH 6.14 cover?
It covers joint gaps up to 200 mm in 4 sizes: JDH 6.14-050 for gaps up to 50 mm, JDH 6.14-100 for gaps up to 100 mm, JDH 6.14-150 for gaps up to 150 mm and JDH 6.14-200 for gaps up to 200 mm.
How much movement can the JDH 6.14 accommodate?
It accommodates ±30 mm of movement.
What is the JDH 6.14 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.14 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.14 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.14 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.16
Embedded all-metal floor expansion joint for wide gaps
All metal floor joints
The VEDA JDH 6.16 is an embedded all-metal floor expansion joint for wide gaps. It covers joint gaps up to 250 mm, accommodates movement of ±50 mm and is made of aluminium.
Embedded floor expansion joint for indoor and outdoor applications, comprising two side angle sections and a central element of thick section made of aluminium, able to take up significant expansion and contraction movements, as well as vertical shearing movements.
Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints with a gap up to 250 mm. Suitable for intense traffic of light vehicles
Section length of 2 m
Aluminium side angle sections, pre-drilled
Floor-to-floor and floor-to-wall types
Anti-slip ribbed surface
This product is supplied ready to install, with spacers that must be removed after installation on the floor
Special parts on demand (T, X, L…)
Embedded expansion joint
For wide gaps
For joint gaps from 110 to 250 mm
Sizes and movement
JDH 6.16 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.16-250
250 mm
+50 / −50 mm
300 mm
410 mm
50 – 80 mm
Specifications
Product type
Embedded all-metal floor expansion joint for wide gaps
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 250 mm
Movement
±50 mm
Sizes available
1 model
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.16?
The VEDA JDH 6.16 is an embedded all-metal floor expansion joint for wide gaps. Embedded floor expansion joint for indoor and outdoor applications, comprising two side angle sections and a central element of thick section made of aluminium, able to take up significant expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.
What joint gap widths does the JDH 6.16 cover?
It covers joint gaps up to 250 mm.
How much movement can the JDH 6.16 accommodate?
It accommodates ±50 mm of movement.
What is the JDH 6.16 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.16 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.16 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.16 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.17
All-metal seismic floor expansion joint
All metal floor joints · Seismic joints
The VEDA JDH 6.17 is an all-metal seismic floor expansion joint. It covers joint gaps up to 200 mm, accommodates movement of ±25 to ±100 mm and is made of aluminium and stainless steel.
All metal floor expansion joint for exterior and interior use, made of 2 aluminium side plates and a heavy duty aluminium or stainless steel central plate allowing expansion and seismic contraction of the joint.
Fixings: consult us
Please consult us to check the use of the product with non-pneumatic wheeled vehicles
Sizes and movement
JDH 6.17 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.17-050
50 mm
+25 / −25 mm
175 mm
226 mm
38 mm
JDH 6.17-100
100 mm
+50 / −50 mm
225 mm
276 mm
38 mm
JDH 6.17-150
150 mm
+75 / −75 mm
320 mm
420 mm
50 mm
JDH 6.17-200
200 mm
+100 / −100 mm
400 mm
500 mm
50 mm
Specifications
Product type
All-metal seismic floor expansion joint
Category
All metal floor joints · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium, stainless steel
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
±25 to ±100 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.17?
The VEDA JDH 6.17 is an all-metal seismic floor expansion joint. All metal floor expansion joint for exterior and interior use, made of 2 aluminium side plates and a heavy duty aluminium or stainless steel central plate allowing expansion and seismic contraction of the joint. Fixings: consult us
What joint gap widths does the JDH 6.17 cover?
It covers joint gaps up to 200 mm in 4 sizes: JDH 6.17-050 for gaps up to 50 mm, JDH 6.17-100 for gaps up to 100 mm, JDH 6.17-150 for gaps up to 150 mm and JDH 6.17-200 for gaps up to 200 mm.
How much movement can the JDH 6.17 accommodate?
Between ±25 and ±100 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.17 made of?
It is made of aluminium and stainless steel. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.17 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.17 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.17 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.20
All-aluminium floor expansion joint for wide multidirectional movement
All metal floor joints
The VEDA JDH 6.20 is an all-aluminium floor expansion joint for wide multidirectional movement. It covers joint gaps up to 340 mm, accommodates movement of ±20 to ±75 mm and is made of aluminium.
All-aluminium seismic floor expansion joint for indoor and outdoor applications. The two aluminium inner components slide one into the other, which takes up any movement due to expansion and contraction. Interchangeable upper components made of aluminium, with the option of a nitrile strip for levelling.
All metal floor expansion joint
Multidirectional movement joint
For joint gaps from 135 to 340 mm
Sizes and movement
JDH 6.20 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.20-135
135 mm
+20 / −20 mm
195 mm
255 mm
32 / 45.5 mm
JDH 6.20-210
210 mm
+50 / −50 mm
280 mm
380 mm
32 / 45.5 mm
JDH 6.20-250
250 mm
+60 / −60 mm
310 mm
410 mm
32 / 45.5 mm
JDH 6.20-340
340 mm
+75 / −75 mm
405 mm
505 mm
32 / 45.5 mm
Specifications
Product type
All-aluminium floor expansion joint for wide multidirectional movement
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 340 mm
Movement
±20 to ±75 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Details
Wide multidirectional movement expansion joint
The multidirectional movement joint is suitable for all types of finish: concrete, screed, tiling, etc.
How to use multidirectional movement joints?
This multidirectional movement joint is suitable for intense traffic of pedestrians and light trolleys (airport, supermarkets…), as well as traffic of light vehicles.
Section length of 4 m.
Aluminium side angle sections, pre-drilled. Nitrile strip as option.
Floor-to-floor type, and floor-to-wall type with exposed skirting (type A) and hidden skirting (type AV). Ribbed anti-slip surface. Nitrile strip for levelling as option. Special finish with anti-slip nitrile inserts on request.
Special parts on demand (T, X, L…).
Frequently asked questions
What is the JDH 6.20?
The VEDA JDH 6.20 is an all-aluminium floor expansion joint for wide multidirectional movement. The two aluminium inner components slide one into the other, which takes up any movement due to expansion and contraction. Interchangeable upper components made of aluminium, with the option of a nitrile strip for levelling.
What joint gap widths does the JDH 6.20 cover?
It covers joint gaps up to 340 mm in 4 sizes: JDH 6.20-135 for gaps up to 135 mm, JDH 6.20-210 for gaps up to 210 mm, JDH 6.20-250 for gaps up to 250 mm and JDH 6.20-340 for gaps up to 340 mm.
How much movement can the JDH 6.20 accommodate?
Between ±20 and ±75 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.20 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.20 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.20 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.20 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.22
Aluminium seismic floor expansion joint for wide movements
All metal floor joints · Seismic joints
The VEDA JDH 6.22 is an aluminium seismic floor expansion joint for wide movements. It covers joint gaps up to 150 mm, accommodates movement of up to +80 / −100 mm and is made of aluminium.
Seismic expansion joint for wide seismic movements that comprises side angle sections and a central plate made of aluminium. It is able to take up large expansion and contraction movements, as well as vertical shearing movements, and is also suitable for all types of finish: concrete, screed, tiling, etc.
The JDH 6.22 seismic expansion joint and fire stop expansion joint can be used for indoor and outdoor floor joints where a gap of up to 150 mm, with significant movement, is present. It is suitable for pedestrian and light trolley traffic.
The JDH 6.22 seismic expansion joint comes in 3m section lengths, and features aluminium side angle sections and middle plate
VEDA’s JDH 6.22 range includes floor-to-floor (JDH 6.22) and floor-to-wall (JDH 6.22A) versions, with anti-slip ribbed surfaces. Optional waterproof membranes, with the potential to integrate a drainage system to recover liquid, are also available. Moreover, the JDH 6.22 seismic expansion joint range can be used in association with vertical joints that offer the same finish and movement range (type JDV 4.02 or other).
Seismic expansion joint
For wide movements: 50 %
For joint gaps from 50 to 150 mm
Sizes and movement
JDH 6.22 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.22-050
50 mm
+50 / −50 mm
195 mm
195 mm
33 mm
JDH 6.22-100
100 mm
+80 / −100 mm
330 mm
330 mm
33 mm
JDH 6.22-150
150 mm
+80 / −100 mm
330 mm
330 mm
33 mm
Specifications
Product type
Aluminium seismic floor expansion joint for wide movements
Category
All metal floor joints · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 150 mm
Movement
Up to +80 / −100 mm
Sizes available
3 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.22?
The VEDA JDH 6.22 is an aluminium seismic floor expansion joint for wide movements. Seismic expansion joint for wide seismic movements that comprises side angle sections and a central plate made of aluminium. It is able to take up large expansion and contraction movements, as well as vertical shearing movements, and is also suitable for all types of finish: concrete, screed, tiling, etc.
What joint gap widths does the JDH 6.22 cover?
It covers joint gaps up to 150 mm in 3 sizes: JDH 6.22-050 for gaps up to 50 mm, JDH 6.22-100 for gaps up to 100 mm and JDH 6.22-150 for gaps up to 150 mm.
How much movement can the JDH 6.22 accommodate?
Up to +80 / −100 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.22 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.22 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.22 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.22 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.24
Stainless steel seismic floor expansion joint for large movements
All metal floor joints · Seismic joints
The VEDA JDH 6.24 is a stainless steel seismic floor expansion joint for large movements. It covers joint gaps up to 200 mm, accommodates movement of up to +85 / −100 mm and is made of stainless steel.
Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints with a gap up to 200mm (please enquire if more width is required), with large amount of movements. SVF joints are particularly suitable for harsh environments such as the seaside, kitchens, swimming pools, water parks and thalassotherapy spas. Suitable for non-intense traffic of light vehicles, pedestrians and light trolleys.
Section length of 3 m
Stainless steel side angle sections and middle plate
Floor-to-floor JDH 6.24 type, and floor-to-wall JDH 6.24 A type Anti-slip ribbed stainless steel. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. SVF joints can be matched to vertical joints in terms of finish and movement range (please enquire).
Seismic expansion joint
For wide movements: 50 %
For joint gaps from 50 to 200 mm
Sizes and movement
JDH 6.24 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.24-050
50 mm
+40 / −40 mm
160 mm
160 mm
22 mm
JDH 6.24-100
100 mm
+40 / −40 mm
200 mm
200 mm
22 mm
JDH 6.24-150
150 mm
+85 / −100 mm
330 mm
330 mm
32 mm
JDH 6.24-200
200 mm
+85 / −100 mm
330 mm
330 mm
32 mm
Specifications
Product type
Stainless steel seismic floor expansion joint for large movements
Category
All metal floor joints · Seismic joints
Brand
VEDA (VEDA France)
Material
Stainless steel
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
Up to +85 / −100 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.24?
The VEDA JDH 6.24 is a stainless steel seismic floor expansion joint for large movements. Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.
What joint gap widths does the JDH 6.24 cover?
It covers joint gaps up to 200 mm in 4 sizes: JDH 6.24-050 for gaps up to 50 mm, JDH 6.24-100 for gaps up to 100 mm, JDH 6.24-150 for gaps up to 150 mm and JDH 6.24-200 for gaps up to 200 mm.
How much movement can the JDH 6.24 accommodate?
Up to +85 / −100 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.24 made of?
It is made of stainless steel. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.24 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.24 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.24 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.26
Seismic floor expansion joint for flexible floor coverings
All metal floor joints · Seismic joints
The VEDA JDH 6.26 is a seismic floor expansion joint for flexible floor coverings. It covers joint gaps up to 150 mm, accommodates movement of up to +80 / −100 mm and is made of aluminium.
Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. . Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints with a gap up to 200 mm (please enquire if more width is required), with large amount of movements. JDH 6.26 joints are particularly suitable for hospitals, schools, etc. Suitable for intense pedestrians and light trolleys traffic.
Section length of 3 lm
Stainless steel side angle sections and middle plate
Floor-to-floor Series JDH 6.26 , and floor-to-wall Series JDH 6.26 A Anti-slip ribbed stainless steel. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. JDH 6.24 joints can be matched to vertical joints in terms of finish and movement range (please enquire).
Seismic expansion joint
Special flexible floors
For joint gaps from 50 to 200 mm
Sizes and movement
JDH 6.26 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.26-050
50 mm
+50 / −40 mm
195 mm
190 mm
40 mm
JDH 6.26-100
100 mm
+80 / −100 mm
330 mm
325 mm
40 mm
JDH 6.26-150
150 mm
+80 / −100 mm
330 mm
325 mm
40 mm
Specifications
Product type
Seismic floor expansion joint for flexible floor coverings
Category
All metal floor joints · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 150 mm
Movement
Up to +80 / −100 mm
Sizes available
3 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.26?
The VEDA JDH 6.26 is a seismic floor expansion joint for flexible floor coverings. Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. .
What joint gap widths does the JDH 6.26 cover?
It covers joint gaps up to 150 mm in 3 sizes: JDH 6.26-050 for gaps up to 50 mm, JDH 6.26-100 for gaps up to 100 mm and JDH 6.26-150 for gaps up to 150 mm.
How much movement can the JDH 6.26 accommodate?
Up to +80 / −100 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.26 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.26 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.26 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.26 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.28
All-metal floor expansion joint for tiles and stone
All metal floor joints
The VEDA JDH 6.28 is an all-metal floor expansion joint for tiles and stone. It covers joint gaps up to 200 mm, accommodates movement of ±25 mm and is made of aluminium and stainless steel.
All-metal floor expansion joint, comprising the side angle sections and a central plate made of stainless steel or aluminium, able to take up expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of hard floors (tiles, stone, marble, etc.), but can also be used with flexible floors or carpet.
For indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements. Suitable for traffic of pedestrians and light trolleys.
Section length of 3 m
Aluminium side angle sections and stainless steel middle plate
Floor-to-floor type only. The central plate takes the mortar on which the floor covering in laid. Once the floor covering is laid, the joint is practically invisible; only two stainless steel sections remain exposed. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. JDH 6.28 joints can be matched to vertical joints of similar finish and with the same movement range (please enquire).
Central pan in stainless or aluminium and side plates in aluminium
Special tiles and stones
For joint gaps from 50 to 150 mm
Sizes and movement
JDH 6.28 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.28-050
50 mm
+25 / −25 mm
180 mm
200 mm
50 mm
JDH 6.28-100
100 mm
+25 / −25 mm
230 mm
250 mm
50 mm
JDH 6.28-150
150 mm
+25 / −25 mm
280 mm
300 mm
50 mm
JDH 6.28-200
200 mm
+25 / −25 mm
330 mm
350 mm
50 mm
Specifications
Product type
All-metal floor expansion joint for tiles and stone
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Aluminium, stainless steel
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
±25 mm
Sizes available
4 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.28?
The VEDA JDH 6.28 is an all-metal floor expansion joint for tiles and stone. All-metal floor expansion joint, comprising the side angle sections and a central plate made of stainless steel or aluminium, able to take up expansion and contraction movements, as well as vertical shearing movements.
What joint gap widths does the JDH 6.28 cover?
It covers joint gaps up to 200 mm in 4 sizes: JDH 6.28-050 for gaps up to 50 mm, JDH 6.28-100 for gaps up to 100 mm, JDH 6.28-150 for gaps up to 150 mm and JDH 6.28-200 for gaps up to 200 mm.
How much movement can the JDH 6.28 accommodate?
It accommodates ±25 mm of movement.
What is the JDH 6.28 made of?
It is made of aluminium and stainless steel. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.28 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.28 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.28 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.282
Seismic floor expansion joint for large openings
All metal floor joints · Seismic joints
The VEDA JDH 6.282 is a seismic floor expansion joint for large openings. It covers joint gaps up to 300 mm, accommodates movement of ±25 to ±150 mm and is made of aluminium and steel.
The JDH 6.282 seismic expansion joint in stainless steel or aluminum is suitable for openings up to 300 mm (other openings on request). Design may differ from that shown for stainless steel versions. Please consult us. Several centerplate thicknesses are available in aluminum and stainless steel to suit your needs.
Stainless steel or aluminum expansion joint
Profile for large movements
For openings up to 300 mm
Sizes and movement
JDH 6.282 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.282-050
50 mm
+25 / −25 mm
204 mm
275 mm
43 mm
JDH 6.282-075
75 mm
+37.5 / −37.5 mm
205 mm
275 mm
43 mm
JDH 6.282-100
100 mm
+50 / −50 mm
230 mm
300 mm
4.3 mm
JDH 6.282-150
150 mm
+75 / −75 mm
280 mm
350 mm
43 mm
JDH 6.282-200
200 mm
+100 / −100 mm
511 mm
630 mm
50 mm
JDH 6.282-250
250 mm
+125 / −125 mm
561 mm
681 mm
50 mm
JDH 6.282-300
300 mm
+150 / −150 mm
611 mm
730 mm
50 mm
Specifications
Product type
Seismic floor expansion joint for large openings
Category
All metal floor joints · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium, steel
Colour / finish
Natural
Version
Flat and angle
Installation
Embedded
Joint gap
Up to 300 mm
Movement
±25 to ±150 mm
Sizes available
7 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load-bearing capacity is based on the initial position of the joint. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200mm.
Frequently asked questions
What is the JDH 6.282?
The VEDA JDH 6.282 is a seismic floor expansion joint for large openings. The JDH 6.282 seismic expansion joint in stainless steel or aluminum is suitable for openings up to 300 mm (other openings on request). Design may differ from that shown for stainless steel versions.
What joint gap widths does the JDH 6.282 cover?
It covers joint gaps up to 300 mm across 7 models, from JDH 6.282-050 to JDH 6.282-300. The size table lists the gap for each model.
How much movement can the JDH 6.282 accommodate?
Between ±25 and ±150 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.282 made of?
It is made of aluminium and steel. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.282 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.282 defined?
The load-bearing capacity is based on the initial position of the joint. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.282 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.29
Aluminium floor expansion joint for large seismic movements
All metal floor joints · Seismic joints
The VEDA JDH 6.29 is an aluminium floor expansion joint for large seismic movements. It covers joint gaps up to 600 mm, accommodates movement of up to +300 / −600 mm and is made of aluminium.
Aluminium seismic floor expansion joint and central pan in galvanized steel specially designed for tile or stone integration (max height : 20 mm).
This profile is designed for extra wide gaps and is adapted to cope with large seismic movements up tp 100%
Floor expansion joint adapted to large seismic movements
Adapted to cope with large seismic movements
For joint gaps from 100 to 600 mm
Sizes and movement
JDH 6.29 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.29-100
100 mm
+50 / −100 mm
325 mm
395 mm
50 mm
JDH 6.29-150
150 mm
+75 / −150 mm
400 mm
470 mm
50 mm
JDH 6.29-200
200 mm
+100 / −200 mm
475 mm
545 mm
50 mm
JDH 6.29-250
250 mm
+125 / −250 mm
550 mm
620 mm
50 mm
JDH 6.29-300
300 mm
+150 / −300 mm
625 mm
695 mm
50 mm
JDH 6.29-350
350 mm
+175 / −350 mm
700 mm
770 mm
50 mm
JDH 6.29-400
400 mm
+200 / −400 mm
775 mm
845 mm
50 mm
JDH 6.29-450
450 mm
+225 / −450 mm
850 mm
920 mm
50 mm
JDH 6.29-500
500 mm
+250 / −500 mm
925 mm
995 mm
50 mm
JDH 6.29-600
600 mm
+300 / −600 mm
1075 mm
1145 mm
50 mm
Specifications
Product type
Aluminium floor expansion joint for large seismic movements
Category
All metal floor joints · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 600 mm
Movement
Up to +300 / −600 mm
Sizes available
10 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.29?
The VEDA JDH 6.29 is an aluminium floor expansion joint for large seismic movements. Aluminium seismic floor expansion joint and central pan in galvanized steel specially designed for tile or stone integration (max height : 20 mm). This profile is designed for extra wide gaps and is adapted to cope with large seismic movements up tp 100%
What joint gap widths does the JDH 6.29 cover?
It covers joint gaps up to 600 mm across 10 models, from JDH 6.29-100 to JDH 6.29-600. The size table lists the gap for each model.
How much movement can the JDH 6.29 accommodate?
Up to +300 / −600 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.29 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.29 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.29 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.29 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.30
All-brass floor expansion joint for luxurious finishes
All metal floor joints
The VEDA JDH 6.30 is an all-brass floor expansion joint for luxurious finishes. It covers joint gaps up to 30 mm, accommodates movement of ±10 mm and is made of brass.
All-brass floor expansion joint for indoor applications, comprising two side angle sections held by fixing brackets and a central element made of brass, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, marble, etc.
For indoor and outdoor floor joints with a gap up to 30 mm. Suitable for pedestrians and non-intense traffic of light vehicles.
Section length of 3 m. Brass brackets (4 pieces/m). Brass side angle sections
Floor-to-floor type only. Plain surface, brass
Brass expansion joint, luxurious finishes
All types of finishes: screed, natural stone, cast stone, marble
For joint gaps of 30 mm
Sizes and movement
JDH 6.30 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.30-030
30 mm
+10 / −10 mm
50 mm
120 mm
40 mm
Specifications
Product type
All-brass floor expansion joint for luxurious finishes
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Brass
Colour / finish
Natural
Version
Flat only
Joint gap
Up to 30 mm
Movement
±10 mm
Sizes available
1 model
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.30?
The VEDA JDH 6.30 is an all-brass floor expansion joint for luxurious finishes. All-brass floor expansion joint for indoor applications, comprising two side angle sections held by fixing brackets and a central element made of brass, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, marble, etc.
What joint gap widths does the JDH 6.30 cover?
It covers joint gaps up to 30 mm.
How much movement can the JDH 6.30 accommodate?
It accommodates ±10 mm of movement.
What is the JDH 6.30 made of?
It is made of brass. Colour and finish options: natural. Version: flat only.
Is the JDH 6.30 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.30 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.30 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.32
All-stainless steel floor expansion joint
All metal floor joints
The VEDA JDH 6.32 is an all-stainless steel floor expansion joint. It covers joint gaps up to 60 mm, accommodates movement of ±5 to ±15 mm and is made of stainless steel.
All-stainless steel floor expansion joint for indoor and outdoor applications, comprising two side angle sections held by fixing brackets and two central elements made of stainless steel, able to take up expansion and contraction movements.
Suitable for all types of finish: concrete, screed, tiling, marble, etc.
For indoor and outdoor floor joints with a gap up to 35 mm. Suitable for pedestrian traffic
Section length of 2,99 lm. Stainless steel side angle sections
Floor-to-floor type only
For difficult environment: chemistry, industry, food industry
All types of finishes: screed, natural stone, cast stone
For joint gaps from 20 to 60 mm
Sizes and movement
JDH 6.32 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.32-020
20 mm
−5 / +5 mm
30 mm
128 mm
30 – 100 mm
JDH 6.32-030
30 mm
+8 / −8 mm
37 mm
133 mm
30 – 100 mm
JDH 6.32-040
40 mm
+10 / −10 mm
45 mm
143 mm
35 – 100 mm
JDH 6.32-050
50 mm
+13 / −13 mm
55 mm
165 mm
40 – 100 mm
JDH 6.32-060
60 mm
+15 / −15 mm
68 mm
205 mm
50 – 100 mm
Specifications
Product type
All-stainless steel floor expansion joint
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Stainless steel
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 60 mm
Movement
±5 to ±15 mm
Sizes available
5 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.32?
The VEDA JDH 6.32 is an all-stainless steel floor expansion joint. All-stainless steel floor expansion joint for indoor and outdoor applications, comprising two side angle sections held by fixing brackets and two central elements made of stainless steel, able to take up expansion and contraction movements.
What joint gap widths does the JDH 6.32 cover?
It covers joint gaps up to 60 mm in 5 sizes: JDH 6.32-020 for gaps up to 20 mm, JDH 6.32-030 for gaps up to 30 mm, JDH 6.32-040 for gaps up to 40 mm, JDH 6.32-050 for gaps up to 50 mm and JDH 6.32-060 for gaps up to 60 mm.
How much movement can the JDH 6.32 accommodate?
Between ±5 and ±15 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.32 made of?
It is made of stainless steel. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.32 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.32 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.32 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.40
Aluminium seismic floor expansion joint for light loads
All metal floor joints · Seismic joints
The VEDA JDH 6.40 is an aluminium seismic floor expansion joint for light loads. It covers joint gaps up to 850 mm, accommodates movement of up to +400 / −400 mm and is made of aluminium.
This seismic floor expansion joint is specially designed for use with tiles or stone. It is suitable for both indoor and outdoor use with pedestrian traffic only. This recessed profile is made of aluminum.
Seismic expansion joint
Special light loads
For joint openings up to 850 mm
Sizes and movement
JDH 6.40 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.40-075
75 mm
+40 / −20 mm
441 mm
510 mm
60 mm
JDH 6.40-100
100 mm
+50 / −50 mm
466 mm
525 mm
60 mm
JDH 6.40-150
150 mm
+75 / −75 mm
557 mm
616 mm
60 mm
JDH 6.40-200
200 mm
+100 / −100 mm
691 mm
750 mm
60 mm
JDH 6.40-250
250 mm
+125 / −125 mm
742 mm
800 mm
60 mm
JDH 6.40-300
300 mm
+150 / −150 mm
792 mm
850 mm
60 mm
JDH 6.40-400
400 mm
+200 / −200 mm
892 mm
950 mm
60 mm
JDH 6.40-500
500 mm
+200 / −200 mm
992 mm
1050 mm
60 mm
JDH 6.40-600
600 mm
+200 / −200 mm
1092 mm
1150 mm
60 mm
JDH 6.40-850
850 mm
+400 / −400 mm
1642 mm
1701 mm
60 mm
Specifications
Product type
Aluminium seismic floor expansion joint for light loads
Category
All metal floor joints · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Installation
Embedded profile
Joint gap
Up to 850 mm
Movement
Up to +400 / −400 mm
Sizes available
10 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Frequently asked questions
What is the JDH 6.40?
The VEDA JDH 6.40 is an aluminium seismic floor expansion joint for light loads. This seismic floor expansion joint is specially designed for use with tiles or stone. It is suitable for both indoor and outdoor use with pedestrian traffic only.
What joint gap widths does the JDH 6.40 cover?
It covers joint gaps up to 850 mm across 10 models, from JDH 6.40-075 to JDH 6.40-850. The size table lists the gap for each model.
How much movement can the JDH 6.40 accommodate?
Up to +400 / −400 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.40 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.40 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.40 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.34
Surface-mounted all-aluminium floor expansion joint for intensive traffic
All metal floor joints
The VEDA JDH 6.34 is a surface-mounted all-aluminium floor expansion joint for intensive traffic. It covers joint gaps up to 50 mm, accommodates movement of ±6 to ±8 mm and is made of aluminium.
All aluminium floor expansion joint, surface-mounted, for indoor and outdoor applications. The two aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc.
For indoor and outdoor floor joints with a gap between 35 mm and 50 mm. Installation on finished floors. Suitable for heavy traffic of fork-lift trucks on pneumatic tyres, pallet trucks and intense traffic of light vehicles.
Section length of 4 m. Nitrile vapour barrier. Aluminium side angle sections, not drilled
Floor-to-floor type, and floor-to-wall type with exposed skirting. Vapour membrane as option, which can be supplied as whole length to avoid joining on site. Drilled and countersunk available on request. Special parts on demand (T, X, L…).
Surface mounted floor expansion joint
For intensive traffic
For joint gaps from 35 to 50 mm
Sizes and movement
JDH 6.34 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.34-035
35 mm
+6 / −6 mm
155 mm
155 mm
30 mm
JDH 6.34-050
50 mm
+8 / −8 mm
170 mm
170 mm
30 mm
Specifications
Product type
Surface-mounted all-aluminium floor expansion joint for intensive traffic
Category
All metal floor joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 50 mm
Movement
±6 to ±8 mm
Sizes available
2 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.34?
The VEDA JDH 6.34 is a surface-mounted all-aluminium floor expansion joint for intensive traffic. All aluminium floor expansion joint, surface-mounted, for indoor and outdoor applications. The two aluminium components slide one into the other, which takes up any movement due to expansion and contraction.
What joint gap widths does the JDH 6.34 cover?
It covers joint gaps up to 50 mm in 2 sizes: JDH 6.34-035 for gaps up to 35 mm and JDH 6.34-050 for gaps up to 50 mm.
How much movement can the JDH 6.34 accommodate?
Between ±6 and ±8 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.34 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.34 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.34 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.34 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDH 6.35
All-metal floor expansion joint for level differences up to 140 mm
All metal floor joints · Seismic joints
The VEDA JDH 6.35 is an all-metal floor expansion joint for level differences up to 140 mm. It covers joint gaps up to 500 mm, accommodates movement of up to +250 / −300 mm and is made of aluminium.
All metal floor expansion joint for exterior and interior use. Suitable for all types of finishes: screed, natural stone, marble etc.
Suitable for joints up to 150mm with level differences up to 50mm. A technical data sheet for openings up to 500mm with level differences up to 140mm is available on request.
For indoor and outdoor applications
Installation on finished floors. Suitable for intensive light-vehicle traffic
Floor-to-floor type, and floor-to-wall type
Expansion joint for level differences up to 140 mm
For intensive vehicular traffic
For joint gaps from 30 to 500 mm
Sizes and movement
JDH 6.35 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDH 6.35-050
30 – 50 mm
+50 / −25 mm
238 mm
238 mm
6 mm
JDH 6.35-075
75 mm
+60 / −50 mm
277 mm
277 mm
9 mm
JDH 6.35-100
100 mm
+60 / −60 mm
302 mm
302 mm
9 mm
JDH 6.35-150
150 mm
+100 / −100 mm
400 mm
400 mm
12 mm
JDH 6.35-200
200 mm
+100 / −140 mm
501 mm
501 mm
13 mm
JDH 6.35-250
250 mm
+150 / −175 mm
601 mm
601 mm
12 mm
JDH 6.35-300
300 mm
+175 / −225 mm
686 mm
686 mm
12 mm
JDH 6.35-400
400 mm
+200 / −300 mm
811 mm
811 mm
12 mm
JDH 6.35-500
500 mm
+250 / −300 mm
936 mm
936 mm
12 mm
Specifications
Product type
All-metal floor expansion joint for level differences up to 140 mm
Category
All metal floor joints · Seismic joints
Brand
VEDA (VEDA France)
Material
Aluminium
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 500 mm
Movement
Up to +250 / −300 mm
Sizes available
9 models
Compatibility
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.35?
The VEDA JDH 6.35 is an all-metal floor expansion joint for level differences up to 140 mm. Suitable for all types of finishes: screed, natural stone, marble etc. Suitable for joints up to 150mm with level differences up to 50mm.
What joint gap widths does the JDH 6.35 cover?
It covers joint gaps up to 500 mm across 9 models, from JDH 6.35-050 to JDH 6.35-500. The size table lists the gap for each model.
How much movement can the JDH 6.35 accommodate?
Up to +250 / −300 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.35 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.35 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.35 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.35 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
The VEDA JDH 6.36 is a surface-mounted all-aluminium floor expansion joint. It covers joint gaps up to 135 mm, accommodates movement of ±7 to ±25 mm and is made of aluminium.
All aluminium floor expansion joint, surface-mounted, for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish:
concrete, screed, tiling, etc.
Surface mounted floor expansion joint
For intensive traffic
For joint gaps from 65 to 135 mm
Sizes and movement
JDH 6.36 sizes: joint gap, movement and dimensions
VEDA fire protection solutions and waterproofing membranes
Load-bearing capacity. The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Frequently asked questions
What is the JDH 6.36?
The VEDA JDH 6.36 is a surface-mounted all-aluminium floor expansion joint. All aluminium floor expansion joint, surface-mounted, for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction.
What joint gap widths does the JDH 6.36 cover?
It covers joint gaps up to 135 mm in 4 sizes: JDH 6.36-065 for gaps up to 65 mm, JDH 6.36-090 for gaps up to 90 mm, JDH 6.36-110 for gaps up to 110 mm and JDH 6.36-135 for gaps up to 135 mm.
How much movement can the JDH 6.36 accommodate?
Between ±7 and ±25 mm, depending on the model. The size table lists the movement for each model.
What is the JDH 6.36 made of?
It is made of aluminium. Colour and finish options: natural. Version: flat and angle.
Is the JDH 6.36 compatible with fire protection and waterproofing?
Yes. It is compatible with VEDA fire protection solutions and waterproofing membranes.
How is the load capacity of the JDH 6.36 defined?
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDH 6.36 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDT 7.02
Watertight roof expansion joint
Roof joints
The VEDA JDT 7.02 is a watertight roof expansion joint. It covers joint gaps up to 200 mm, accommodates movement of ±50 to ±200 mm and is made of aluminium and stainless steel.
Roof expansion joint cover comprises a waterproof EPDM membrane, a support system anchored to the concrete element (parapet), and an aluminium top that is clipped to the support system.
Protection and waterproofing for expansion joints in roofs. Available for joints with a gap up to 600 mm.
Section length of 3 m. Aluminium support system and top section; stainless steel option
Flat and corner types
Seismic expansion joint
Watertight, especially developed for roofs
For joint gaps from 50 to 200 mm
Sizes and movement
JDT 7.02 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDT 7.02-550
50 mm
50 / −50 mm
550 mm
550 mm
104 mm
JDT 7.02-650
100 mm
100 / −100 mm
650 mm
650 mm
107 mm
JDT 7.02-750
150 mm
150 / −150 mm
750 mm
750 mm
109 mm
JDT 7.02-850
200 mm
200 / −200 mm
850 mm
850 mm
112 mm
Specifications
Product type
Watertight roof expansion joint
Category
Roof joints
Brand
VEDA (VEDA France)
Material
Aluminium, stainless steel
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 200 mm
Movement
±50 to ±200 mm
Sizes available
4 models
Frequently asked questions
What is the JDT 7.02?
The VEDA JDT 7.02 is a watertight roof expansion joint. Roof expansion joint cover comprises a waterproof EPDM membrane, a support system anchored to the concrete element (parapet), and an aluminium top that is clipped to the support system. Protection and waterproofing for expansion joints in roofs.
What joint gap widths does the JDT 7.02 cover?
It covers joint gaps up to 200 mm in 4 sizes: JDT 7.02-550 for gaps up to 50 mm, JDT 7.02-650 for gaps up to 100 mm, JDT 7.02-750 for gaps up to 150 mm and JDT 7.02-850 for gaps up to 200 mm.
How much movement can the JDT 7.02 accommodate?
Between ±50 and ±200 mm, depending on the model. The size table lists the movement for each model.
What is the JDT 7.02 made of?
It is made of aluminium and stainless steel. Colour and finish options: natural. Version: flat and angle.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDT 7.02 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDT 7.03
Watertight seismic roof expansion joint
Roof joints
The VEDA JDT 7.03 is a watertight seismic roof expansion joint. It covers joint gaps up to 400 mm, accommodates movement of ±50 to ±300 mm and is made of aluminium and stainless steel.
Watertight seismic expansion joint for efficient and durable covering of roof expansion joints. Made of a continuous watertight membrane associated with a cover. This system is able to cope with significant three-dimensional movements.
Seismic expansion joint
Watertight, especially developed for roofs
For joint gaps from 50 to 200 mm
Sizes and movement
JDT 7.03 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDT 7.03-050
50 mm
+50 / −50 mm
555 mm
555 mm
40 mm
JDT 7.03-100
100 mm
+100 / −100 mm
605 mm
605 mm
40 mm
JDT 7.03-150
150 mm
+150 / −150 mm
655 mm
655 mm
40 mm
JDT 7.03-200
200 mm
+200 / −200 mm
705 mm
705 mm
40 mm
JDT 7.03-300
300 mm
+300 / −300 mm
805 mm
805 mm
60 mm
JDT 7.03-400
400 mm
+200 / −200 mm
895 mm
895 mm
55 mm
Specifications
Product type
Watertight seismic roof expansion joint
Category
Roof joints
Brand
VEDA (VEDA France)
Material
Aluminium, stainless steel
Colour / finish
Natural
Version
Flat and angle
Joint gap
Up to 400 mm
Movement
±50 to ±300 mm
Sizes available
6 models
Frequently asked questions
What is the JDT 7.03?
The VEDA JDT 7.03 is a watertight seismic roof expansion joint. Watertight seismic expansion joint for efficient and durable covering of roof expansion joints. Made of a continuous watertight membrane associated with a cover.
What joint gap widths does the JDT 7.03 cover?
It covers joint gaps up to 400 mm in 6 sizes: JDT 7.03-050 for gaps up to 50 mm, JDT 7.03-100 for gaps up to 100 mm, JDT 7.03-150 for gaps up to 150 mm, JDT 7.03-200 for gaps up to 200 mm, JDT 7.03-300 for gaps up to 300 mm and JDT 7.03-400 for gaps up to 400 mm.
How much movement can the JDT 7.03 accommodate?
Between ±50 and ±300 mm, depending on the model. The size table lists the movement for each model.
What is the JDT 7.03 made of?
It is made of aluminium and stainless steel. Colour and finish options: natural. Version: flat and angle.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDT 7.03 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
Product data from the manufacturer, VEDA France. Specifications may change; confirm with us before ordering.
JDT 7.04
Waterproof expansion joint for roofs and car parks
Roof joints
The VEDA JDT 7.04 is a waterproof expansion joint for roofs and car parks. It covers joint gaps up to 80 mm, accommodates movement of ±20 to ±30 mm and is made of nitrile and PVC.
Roof waterproof expansion joint suitable for roofs and carparks. Very flexible, and suitable for use with hot asphalt, it is compatible with PVC, EPDM and other waterproof membranes.
For indoor and outdoor floor joints with a gap up to 80 mm. Suitable for waterproofing, generally by meeting the waterproofing system of the construction.
Not suitable on its own for vehicular traffic, it needs to be suitably protected to allow any type of traffic
Flexible nitrile insert, roll length of 25 m
Floor-to-floor type, and floor-to-wall type with exposed skirting
Black sections available made of different materials according to strength requirements
Special parts can be welded using a hot knife
Special parts on demand (T, X, L…)
Watertight expansion joint
Ideal for roofs or car parks
For joint gaps from 25 to 80 mm
Sizes and movement
JDT 7.04 sizes: joint gap, movement and dimensions
Model
Joint gap W
Movement
Visible width S
Total width B
Height H
JDT 7.04-025
25 mm
20 / −20 mm
40 mm
300 mm
28 mm
JDT 7.04-050
50 mm
25 / −25 mm
50 mm
500 mm
50 mm
JDT 7.04-080
80 mm
30 / −30 mm
80 mm
400 mm
25 mm
Specifications
Product type
Waterproof expansion joint for roofs and car parks
Category
Roof joints
Brand
VEDA (VEDA France)
Material
Nitrile, PVC
Colour / finish
Black
Version
Flat and angle
Joint gap
Up to 80 mm
Movement
±20 to ±30 mm
Sizes available
3 models
Frequently asked questions
What is the JDT 7.04?
The VEDA JDT 7.04 is a waterproof expansion joint for roofs and car parks. Very flexible, and suitable for use with hot asphalt, it is compatible with PVC, EPDM and other waterproof membranes. For indoor and outdoor floor joints with a gap up to 80 mm.
What joint gap widths does the JDT 7.04 cover?
It covers joint gaps up to 80 mm in 3 sizes: JDT 7.04-025 for gaps up to 25 mm, JDT 7.04-050 for gaps up to 50 mm and JDT 7.04-080 for gaps up to 80 mm.
How much movement can the JDT 7.04 accommodate?
Between ±20 and ±30 mm, depending on the model. The size table lists the movement for each model.
What is the JDT 7.04 made of?
It is made of nitrile and PVC. Colour and finish options: black. Version: flat and angle.
Where can I get VEDA expansion joints in Singapore?
Two Nine Six O Trading (TNSO) supplies VEDA expansion joints in Singapore. Send us the joint width, expected movement, traffic load and floor finish, and we will confirm the right model and size.
Need the JDT 7.04 for a project in Singapore?
Send us the joint width, expected movement, traffic load and floor finish, and Two Nine Six O Trading will confirm the right size and supply details.
