T2960

SHARPIE MSC1-14 Modified Silicone LM

A one component type, low modulus modified silicone sealant formulated using advanced non- bleed silicone technology to reduce or eliminate dirt pickup, surface streaking, and substrate staining.

Key Highlights

  • ±100% / -50% joint movement capability
  • Primerless adhesion to most substrates (aluminum, stone, brick, concrete, coated panels, prefab housing)
  • Non-staining on marble, granite, limestone
  • Low dirt pickup – reduced streaking and surface staining
  • Neutral cure – non-corrosive, low odor
  • Service temperature: -30°C to +90°C
  • ASTM C920 Class 50, JIS A 5758 F-20LM compliant

Technical Specifications

Chemistry Modified Silicone (Neutral Cure)
Modulus Low
Movement Capability +100% / -50%
Service Temperature -30°C to +90°C
Adhesion Primerless to many substrates; primers P-32 / P-50 available if required
Finish Matte; reduced dirt pickup
Tack-Free (23°C) ~60 minutes
Hardness (Shore A) ~20
Elongation at Break ~780%
Tensile Strength 0.95 N/mm² (Ultimate, 23°C)
Slump 0 mm (5°C & 50°C)
Density ~1.39 g/ml
Cure Rate (6 mm bead) 2–3 days (23°C, 50% RH); >10 days (5°C)
Elastic Recovery 67%
Loss of Volume ~1.4%
Fungal Resistance Pass
Chemical Resistance Good against household cleaners and weathering
Colors Available in up to 50 standard colors

Applications

  • Façade modules, aluminum panels, coated panels, prefab housing
  • Natural stone – marble, granite, limestone (non-staining)
  • Exterior wall joints, roof materials, siding, wood panels
  • Expansion joints in concrete and mortar
  • Terminal sealing of waterproofing sheets
  • Repair of cracks in mortar/concrete
  • Weatherproofing between similar or dissimilar materials
  • Window perimeters and punched openings
  • Interior watertight and airtight joints

Packaging

Format Size Units / Box Notes
Cartridge 320 ml 10 Single-component

 

Downloadable Resources

SDS
TDS