-
CALL US
+(65) 6267 1300 -
EMAIL US
contact@t2960.com.sg -
LOCATE US
21 Tuas West Ave, Singapore 638435
ENAMO GRIP® Two-Part Polyurethane Enamel – Premium Protective Coating
ENAMO GRIP® is a two-part aliphatic polyurethane enamel that forms a uniquely hard and durable coating film with unsurpassed semi-gloss and color retention. This premium coating demonstrates exceptional chalk resistance, water and humidity resistance, plus tremendous scuff, mar, and impact resistance while self-leveling to an even, smooth finish.
Key Features & Benefits
Exceptional durability – unsurpassed semi-gloss and color retention for exterior applications
Multi-surface compatibility – adheres to metal, concrete, masonry, wood, and porous surfaces
Class A fire rating – ASTM E84 flame spread rating of 0 for superior fire resistance
Marine approved – US Coast Guard, ABS, and IMO certifications for maritime applications
Chemical resistance – resistant to acids, solvents, chemicals, water, and humidity
Impact resistance – 160 psi front, 100 psi back for high-traffic applications
Self-leveling formula – creates smooth, even finish without brush marks
Long pot life – 4-6 hours at 70°F for extended working time
Applications & Performance Standards
Primary Applications
Architectural coatings – exterior building surfaces requiring maximum durability
Industrial maintenance – high-wear areas, handrails, machine surfaces
Topcoat systems – over RUST GRIP® and MOIST METAL GRIP primers
Floor coatings – tough, long-lasting finish for high-traffic areas
Marine environments – salt water and maritime applications
Testing & Certifications
USDA Approved – food service and processing facility applications
ASTM E84 Class A – flame spread rating of 0, smoke development of 15
5000-hour salt spray – ASTM B117 extreme corrosion resistance
5000-hour UV/salt spray – ASTM D5894 combined environmental testing
Wind-driven rain resistance – ASTM D6904 weather seal performance
Product Specifications & Coverage
Physical Properties
Mix ratio – 3 parts base to 1 part curing agent by volume
Pot life – 4-6 hours at 70°F, 1 hour at 90°F
Tack free time – 30-60 minutes at 70°F
Overcoat window – 3 hours or less at 70°F
Service temperature – Up to 300°F (149°C) continuous operation
Coverage Rates & Application
| Surface Type | Coverage Rate | Wet Film | Dry Film | Coats Required |
|---|---|---|---|---|
| Porous Surfaces | 200 sq ft/gal | 8 mils | 3.92 mils | 3 coats total |
| Non-Porous Surfaces | 200 sq ft/gal | 8 mils | 3.92 mils | 2 coats over primer |
| Clear Coat Only | 200 sq ft/gal | 8 mils | 3.0 mils | 3 coats |
Application Advantages
Traditional vs. ENAMO GRIP® System
| Feature | Traditional Coatings | ENAMO GRIP® System |
|---|---|---|
| Durability | Standard protection, frequent recoating | 5000-hour tested, long-term performance |
| Chemical Resistance | Limited acid/solvent resistance | Superior resistance to acids, solvents, chemicals |
| Application | Single component, limited working time | Two-part system, 4-6 hour pot life |
| Fire Performance | Variable flame spread ratings | Class A fire rating (0 flame spread) |
| Marine Use | Not marine certified | US Coast Guard, ABS, IMO approved |
| Impact Resistance | Standard impact protection | 160 psi front/100 psi back impact resistance |
