SpecSeal® CS105 Cable Spray is a latex-based, ablative elastomer that intumesces to protect electrical cables against flame propagation. This water-based coating limits flame spread according to IEEE 383, IEEE 1202, IEC 60332-3, and Factory Mutual Class 3971 standards while providing exceptional coverage rates and easy application by spray or brush methods.
Water-based formula – easy installation and cleanup with no solvents or asbestos
Thixotropic properties – high-build application for superior coverage
74% solids content – highest coverage rates at 17.1 sq ft/gal at 3/32″ thickness
FM Approved Class 3971 – meets Factory Mutual requirements for grouped electrical cables
Flexible coating – forms water and weather-resistant protective film
No ampacity derating – maintains cable performance per FM testing
Dual protection – ablative and intumescent properties for comprehensive fire protection
Circuit integrity – provides short-term protection per IEC 60331-21
Cable tray systems – protection of grouped electrical, data, and communications cables
Racked cable installations – industrial and commercial cable management systems
Critical circuits – essential power and control cable protection
Data centers – fire protection for high-density cable installations
Flame spread rating – 0 (ASTM E84) for superior fire resistance
Smoke development – 15 (ASTM E84) for low smoke generation
IEEE compliance – passes IEEE 383 and IEEE 1202 flame propagation tests
IEC standards – meets IEC 60332-3 and IEC 60331-21 requirements
FM approval – Factory Mutual Class 3971 approved for cable protection
Feature | Traditional Methods | SpecSeal® CS105 Method |
---|---|---|
Application Process | Multiple coats, complex mixing | Single component, ready to use |
Coverage Efficiency | Lower solids, multiple applications | 74% solids, superior coverage |
Drying Time | Extended curing periods | 2-hour tack free, 24-48 hour cure |
Cable Modifications | Difficult recoating, system disruption | Easy retrofit and recoating |
Environmental Impact | Solvent-based, VOC emissions | Water-based, no solvents |
Maintenance | Complex touch-up procedures | Simple inspection and recoating |
Non-halogenated formula – environmentally safe composition
No inorganic fibers – eliminates health concerns during application
Low abrasion properties – extends spray equipment life
Conductive until dry – requires electrical safety protocols during application
Catalog Number | Description | Packaging | Weight | UPC Number |
---|---|---|---|---|
CS105 | SpecSeal® Cable Spray | 5 Gallon Pail | 55 lbs (25 kg) | 730573-07104 |
Note: 55-gallon drums available on special order basis